This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PDIUSBD12PWTM +BOM

Full Speed/High Speed USB Peripheral Controller USB 2.0 33V T/R 28-Pin TSSOP / IC USB INTRFC W/PARL BUS 28TSSOP

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

Full Speed/High Speed USB Peripheral Controller USB 2.0 33V T/R 28-Pin TSSOP / IC USB INTRFC W/PARL BUS 28TSSOP

Complies with the Universal Serial Bus specification Rev. 2.0 (basic speed)
High performance USB interface device with integrated SIE, FIFO memory, transceiver and voltage regulator
Compliant with most Device Class specifications
High-speed (2 Mbytes/s) parallel interface to any external microcontroller or microprocessor
Fully autonomous DMA operation
Integrated 320 bytes of multi-configuration FIFO memory
Double buffering scheme for main endpoint increases throughput and eases real-time data transfer
Data transfer rates: 1 Mbytes/s achievable in Bulk mode, 1 Mbits/s achievable in Isochronous mode
Bus-powered capability with very good EMI performance
Controllable LazyClock output during suspend
Software controllable connection to the USB bus (SoftConnect™)
Good USB connection indicator that blinks with traffic (GoodLink™)
Programmable clock frequency output
Complies with the ACPI, OnNOW and USB power management requirements
Internal Power-on reset and low-voltage reset circuit
Available in SO28 and TSSOP28 pin packages
Full industrial grade operation from −40 to +85 °C
Higher than 8 kV in-circuit ESD protection lowers cost of extra components
Full-scan design with high fault coverage (>99%) ensures high quality
Operation with dual voltages: 3.3 ±0.3 V or extended 5 V supply range of 4.0 to 5.5 V
Multiple interrupt modes to facilitate both bulk and isochronous transfers.

ECCN (US)	EAR99	Part Status	Active
HTS	8541.10.00.80	SVHC	Yes
SVHC Exceeds Threshold	Yes	Automotive	No
PPAP	No	Type	Schottky Diode
Maximum DC Reverse Voltage (V)	30	Configuration	Single
Peak Reverse Repetitive Voltage (V)	30	Maximum Continuous Forward Current (A)	1.5
Peak Non-Repetitive Surge Current (A)	50	Peak Forward Voltage (V)	0.445@1A
Peak Reverse Current (uA)	200	Maximum Junction Ambient Thermal Resistance	88°C/W
Minimum Operating Temperature (°C)	-55	Maximum Operating Temperature (°C)	125
Packaging	Tape and Reel	Supplier Temperature Grade	Commercial
Maximum RMS Reverse Voltage (V)	21	Mounting	Surface Mount
PCB changed	2	Pin Count	2
Lead Shape	J-Lead