This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

OPA462IDDA

General Purpose Amplifier 1 Circuit 8-SO PowerPad

Manufacturer:

TI
Mfr.Part #:

OPA462IDDA
Datasheet:

OPA462IDDA Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for OPA462IDDA

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

OPA462IDDA General Description

The OPA462 is a high voltage (180 V) and high current drive (45 mA) operational amplifier. The device is unity-gain stable and has a gain-bandwidth product of 6.5 MHz.

The OPA462 is internally protected against over-temperature conditions and current overloads. The device is fully specified to perform over a wide power-supply range of ±6 V to ±90 V, or on a single supply of 12 V to 180 V. The status flag is an open-drain output that allows the device to be easily referenced to standard low-voltage logic circuitry. This high-voltage operational amplifier provides excellent accuracy and wide output swing, and is free from phase inversion problems that are often found in similar amplifiers.

The output can be disabled using the enable-disable (E/D) pin. The E/D pin has a common return pin to allow for easy interface to low-voltage logic circuitry. This disable is accomplished without disturbing the input signal path, not only saving power but also protecting the load.

Featured in a small exposed-metal pad package, the OPA462 dissipates heat over the industrial temperature range of –40°C to +85°C.

Key Features

Wide power-supply range:
±6 V (12 V) to ±90 V (180 V)
High-output load drive: I_O ±45 mA
Current limit protection
Thermal protection
Status flag
Independent output disable
Gain bandwidth: 6.5 MHz
Slew rate: 32 V/µs
Wide temperature range: –40°C to +85°C
8-pin HSOIC (SO PowerPAD™) package

Specifications

Source Content uid	OPA462IDDA	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.33.00.01
Date Of Intro	2019-04-17	Amplifier Type	OPERATIONAL AMPLIFIER
Average Bias Current-Max (IIB)	0.0001 µA	Bias Current-Max (IIB) @25C	0.0001 µA
Common-mode Reject Ratio-Min	120 dB	Common-mode Reject Ratio-Nom	128 dB
Input Offset Voltage-Max	3400 µV	JESD-30 Code	R-PDSO-G8
JESD-609 Code	e4	Length	4.89 mm
Moisture Sensitivity Level	2	Neg Supply Voltage Limit-Max	-95 V
Neg Supply Voltage-Nom (Vsup)	-90 V	Number of Functions	1
Number of Terminals	8	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	Peak Reflow Temperature (Cel)	260
Seated Height-Max	1.7 mm	Slew Rate-Nom	32 V/us
Supply Current-Max	4 mA	Supply Voltage Limit-Max	95 V
Supply Voltage-Nom (Vsup)	90 V	Surface Mount	YES
Temperature Grade	INDUSTRIAL	Terminal Finish	NICKEL PALLADIUM GOLD SILVER
Terminal Form	GULL WING	Terminal Pitch	1.27 mm
Terminal Position	DUAL	Time@Peak Reflow Temperature-Max (s)	30
Unity Gain BW-Nom	6500	Width	3.9 mm