Payment Method
STA333W
Audio Amplifiers
-
Manufacturer:
-
Mfr.Part #:
STA333W
-
Datasheet:
-
Series:
Sound Terminal™
-
Function:
Fully Integrated Processor
-
Applications:
Pre-Amplifier
-
Number of Channels:
2
-
EDA/CAD Models:
Availability: 4405 PCS
Please fill in the short form below and we will provide you the quotation immediately.
STA333W General Description
The STA333W is an integrated circuit comprising digital audio processing, digital amplifier control and DDX®power output stage to create a high-power, single-chip DDX®solution for all-digital amplification with high quality and high efficiency. The STA333W power section consists of four independent half-bridges stages. These can be configured via digital control to operate in different modes. 2 channels can be provided by two full bridges, providing up to 20 W + 20 W of power. Also provided in the STA333W are new advanced AM radio interference reduction modes. The serial audio data input interface accepts all possible formats, including the popular I2S format. Three channels of DDX®processing are provided. The STA333W is part of the Sound Terminal™ family that provides full digital audio streaming to the speaker offering cost effectiveness, low power dissipation and sound enrichment.
Key Features
- Wide supply-voltage range (4.5 V - 20 V)
- 2 power output configurations
- 2 channels of binary PWM (stereo mode)
- 2 channels of ternary PWM (stereo mode)
- 2 channels of binary PWM (stereo mode)
- 2 channels of ternary PWM (stereo mode)
- PowerSSO-36 with exposed pad down
- 2 channels of 24-bit DDX®
- 100-dB SNR and dynamic range
- Selectable 32- to 192-kHz input sample rates
- I2C control with selectable device address
- Digital gain -80 dB to +48 dB in 0.5-dB steps
- Software volume update
- Individual channel and master gain/attenuation
- Individual channel and master software and hardware mute
- Independent channel volume bypass
- Automatic zero-detect mute
- Automatic invalid input detect mute
- 2-channel I2S input data Interface
- Selectable clock input ratio
- Input channel mapping
- Automatic volume control for limiting maximum power
- 96-kHz internal processing sample rate, 24-bit precision
- Advanced AM interference frequency switching and noise suppression modes
- Thermal-overload and short-circuit protection embedded
- Video application: 576 * fSinput mode support
Specifications
Category | Integrated Circuits (ICs)Audio Special Purpose | Series | Sound Terminal™ |
Function | Fully Integrated Processor | Applications | Pre-Amplifier |
Number of Channels | 2 | Interface | I²C, I²S |
Voltage - Supply | 4.5V ~ 20V | Operating Temperature | 0°C ~ 70°C (TA) |
Specifications | Direct Digital Amplification | Mounting Type | Surface Mount |
Base Product Number | STA333 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4405 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for STA333W, guaranteed quotes back within 12hr.
received quickly. thanks. I changed some led and repaired my light. led working well.