This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

OPA453FAKTWT

80-V, 50-mA optimized for gains greater than 5 with a BW of 7.5-MHz operational amplifiers

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

OPA453FAKTWT
Datasheet:

OPA453FAKTWT Datasheet (PDF)
Amplifier Type:

General Purpose
Number of Circuits:

1
Slew Rate:

38V/µs
Gain Bandwidth Product:

7.5 MHz
EDA/CAD Models:

Request Free CAD Models for OPA453FAKTWT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

OPA453FAKTWT General Description

The OPA452 and OPA453 are low-cost operational amplifiers with high-voltage (80V) and high-current capabilities (50mA). The OPA452 is unity-gain stable and has a gain bandwidth product of 1.8MHz, whereas the OPA453 is optimized for gains greater than 5 and has a 7.5MHz bandwidth.

The OPA452 and OPA453 are internally protected against over-temperature conditions and current overloads. Power supplies in the range of ±10V to ±40V can be used. Unlike most other power op amps, the OPA452 and OPA453 have ensured specifications over the entire power-supply range.

These laser-trimmed, monolithic integrated circuits provide excellent low-level accuracy along with wide output swing. Special design considerations assure that the product is easy to use and free from phase inversion problems often found in other amplifiers.

The OPA452 and OPA453 are available in TO220-7 and DDPAK-7 options. They are specified for a junction temperature range of 40°C to +125°C.

Key Features

WIDE POWER-SUPPLY RANGE:
±10V to ±40V
HIGH OUTPUT LOAD DRIVE:
50mA Continuous
WIDE OUTPUT VOLTAGE SWING: 1V to Rail
FULLY PROTECTED:
Thermal Shutdown
Output Current-Limited
WIDE OPERATING TEMPERATURE RANGE:
–40°C TO +125°C
PACKAGE OPTIONS:
TO220-7
DDPACK-7 Surface-Mount
APPLICATIONS
- PIEZOELECTRIC CELLS
- TEST EQUIPMENT
- AUDIO AMPLIFIERS
- TRANSDUCER DRIVERS
- SERVO DRIVERS

Specifications

Category	Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps	Series	-
Amplifier Type	General Purpose	Number of Circuits	1
Output Type	-	Slew Rate	38V/µs
Gain Bandwidth Product	7.5 MHz	Current - Input Bias	7 pA
Voltage - Input Offset	1 mV	Current - Supply	5.5mA
Current - Output / Channel	50 mA	Voltage - Supply Span (Min)	20 V
Voltage - Supply Span (Max)	80 V	Operating Temperature	-40°C ~ 125°C
Mounting Type	Surface Mount	Base Product Number	OPA453