This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MAX5865ETM

Codec General Purpose 1-CH 10bit 3V 48-Pin TQFN EP

Manufacturer: Analog Devices, Inc
Mfr.Part #: MAX5865ETM
Datasheet: MAX5865ETM Datasheet (PDF)
Number of Bits: 10
Number of Channels: 4
Power (Watts): 2.1 W
Voltage - Supply, Analog: 2.7V ~ 3.3V
EDA/CAD Models: Request Free CAD Models for MAX5865ETM

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MAX5865ETM General Description

The MAX5865 ultra-low-power, highly integrated analog front end is ideal for portable communication equipment such as handsets, PDAs, WLAN, and 3G wireless terminals. The MAX5865 integrates dual 8-bit receive ADCs and dual 10-bit transmit DACs while providing the highest dynamic performance at ultra-low power. The ADCs' analog I-Q input amplifiers are fully differential and accept 1VP-P full-scale signals. Typical I-Q channel phase matching is ±0.2° and amplitude matching is ±0.05dB. The ADCs feature 48.4dB SINAD and 70dBc spurious-free dynamic range (SFDR) at fIN = 5.5MHz and fCLK = 40MHz. The DACs' analog I-Q outputs are fully differential with ±400mV full-scale output, and 1.4V common-mode level. Typical I-Q channel phase matching is ±0.15° and gain matching is ±0.05dB. The DACs also feature dual 10-bit resolution with 72dBc SFDR, and 57dB SNR at fOUT = 2.2MHz and fCLK = 40MHz. The ADCs and DACs operate simultaneously or independently for frequency-division duplex (FDD) and time-division duplex (TDD) modes. A 3-wire serial interface controls power-down and transceiver modes of operation. The typical operating power is 75.6mW at fCLK = 40Msps with the ADCs and DACs operating simultaneously in transceiver mode. The MAX5865 features an internal 1.024V voltage reference that is stable over the entire operating power-supply range and temperature range. The MAX5865 operates on a +2.7V to +3.3V analog power supply and a +1.8V to +3.3V digital I/O power supply for logic compatibility. The quiescent current is 8.5mA in idle mode and 1μA in shutdown mode. The MAX5865 is specified for the extended (-40°C to +85°C) temperature range and is available in a 48-pin thin QFN package.See a parametric table of the complete family of pin-compatible AFEs.

Analog Devices, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

CLK
CLK
IN
OUT
IN
MAX5865EVKIT

Application

3G Wireless Terminals
Fixed/Mobile Broadband Wireless Modems
Narrowband/Wideband CDMA Handsets
PDAs

Specifications

Category	Integrated Circuits (ICs)Data AcquisitionAnalog Front End (AFE)	Mfr	Analog Devices Inc./Maxim Integrated
Series	-	Package	Tray
Product Status	Active	Number of Bits	10
Number of Channels	4	Power (Watts)	2.1 W
Voltage - Supply, Analog	2.7V ~ 3.3V	Voltage - Supply, Digital	2.7V ~ 3.3V
Mounting Type	Surface Mount	Supplier Device Package	48-TQFN (7x7)
Base Product Number	MAX5865