This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

STR485LVQT

3.3V RS485 compatible with 1.8V I/Os and selectable speed 20Mbps or 250kbps

Manufacturer: STMicroelectronics, Inc
Mfr.Part #: STR485LVQT
Datasheet: STR485LVQT Datasheet (PDF)
Type: Transceiver
Protocol: RS485
Number of Drivers/Receivers: 1/1
Duplex: Half
EDA/CAD Models: Request Free CAD Models for STR485LVQT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

STR485LVQT General Description

The STR485 is a low power differential line transceiver for data transmission standard RS485 applications in half-duplex mode. Data and enable signals are compatible with 1.8 V or 3.3 V supplies.Two speeds are selectable through SLR pin: fast data rate up to 20 Mbps or slow data rate for extended cable running to 250 kbps.Excessive power dissipation caused by bus contention or faults is prevented by thermal shutdown circuit that forces the driver outputs into a high impedance state. The receiver has a fail-safe feature, which guarantees a high output state when the inputs are left open, shorted or idle.

STMicroelectronics, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

Half-duplex RS485 transceiver
1.65 V to 3.6 V supply for data and enable signals
3 V to 3.6 V supply for bus supply
High speed: up to 20 Mbps data rate
Low speed selected by SLR pin : 250 kbps
Up to 256 transceivers on the bus
Fail safe receiver (bus open, idle and shorted)
Thermal shutdown protection
Low quiescent current in shutdown mode
Extended temperature range : -40 °C to +105 °C
Available in industry standard DFN10
Bus-pin protection more than:
- ±4 kV HBM protection
- ±8 kV IEC61000-4-2 contact discharge
- ±16 kV IEC61000-4-2 air discharge
- Compliant IEC61000-4-4 fast transient burst Class B

Specifications

Category	Integrated Circuits (ICs)InterfaceDrivers, Receivers, Transceivers	Mfr	STMicroelectronics
Series	-	Package	Tape & Reel (TR)Cut Tape (CT)Digi-Reel®
Product Status	Active	Type	Transceiver
Protocol	RS485	Number of Drivers/Receivers	1/1
Duplex	Half	Receiver Hysteresis	70 mV
Data Rate	20Mbps	Voltage - Supply	1.65V ~ 3.6V
Operating Temperature	-40°C ~ 105°C	Mounting Type	Surface Mount
Supplier Device Package	10-DFN (3x3)	Base Product Number	STR485