This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SN65HVD3088ENSR

RS-485 Interface IC Low-power half-duplex RS-485 transceiver

Manufacturer:

Texas Instruments
Mfr.Part #:

SN65HVD3088ENSR
Datasheet:

SN65HVD3088ENSR Datasheet (PDF)
Mounting Style:

SMD/SMT
Series:

SN65HVD3088E
Function:

Transceiver
Data Rate:

200 kb/s

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SN65HVD3088ENSR General Description

The SNx5HVD308xE are half-duplex transceivers designed for RS-485 data bus networks. Powered by a 5-V supply, they are fully compliant with TIA/EIA-485A standard. With controlled transition times, these devices are suitable for transmitting data over long twisted-pair cables. The SN65HVD3082E and SN75HVD3082E are optimized for signaling rates up to 200 kbps. The SN65HVD3085E is suitable for data transmission up to 1 Mbps, whereas the SN65HVD3088E is suitable for applications that require signaling rates up to 20 Mbps.

These devices are designed to operate with very low supply current, typically 0.3 mA, exclusive of the load. When in the inactive-shutdown mode, the supply current drops to a few nanoamps, which makes these devices ideal for power-sensitive applications.

The wide common-mode range and high ESD protection levels of these devices, make them suitable for demanding applications such as energy meter networks, electrical inverters, status and command signals across telecom racks, as well as cabled chassis interconnects, and industrial automation networks where noise tolerance is essential. These devices match the industry-standard footprint of the SN75176 device. The power-on-reset circuits keep the outputs in a high-impedance state until the supply voltage has stabilized. A thermal-shutdown function protects the device from damage, due to system fault conditions. The SN75HVD3082E is characterized for operation from 0°C to 70°C and SN65HVD308xE is characterized for operation from –40°C to 85°C air temperature. The D package version of the SN65HVD3082E has been characterized for operation from –40°C to 105°C.

Key Features

Meets or exceeds the requirements of the TIA/EIA-485A standard
Low quiescent power
- 0.3-mA Active mode
- 1-nA Shutdown mode
1/8 Unit load up to 256 nodes on a bus
Bus-pin ESD protection up to 15 kV
Industry-standard SN75176 footprint
Fail-safe receiver (bus open, bus shorted, bus idle)
Glitch-free power-up and power-down bus inputs and outputs

Specifications

Product Category	RS-485 Interface IC	Mounting Style	SMD/SMT
Series	SN65HVD3088E	Function	Transceiver
Data Rate	200 kb/s	Number of Drivers	1 Driver
Duplex	Half Duplex	Supply Voltage - Max	5.5 V
Supply Voltage - Min	4.5 V	Operating Supply Current	300 uA
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
ESD Protection	15 kV	Input Voltage	4.5 V to 5.5 V
Operating Supply Voltage	4.5 VC to 5.5 V	Output Type	Digital
Pd - Power Dissipation	276 mW	Product	RS-485 Receivers
Product Type	RS-485 Interface IC	Propagation Delay Time	700 ns
Shutdown	Shutdown	Factory Pack Quantity	2000
Subcategory	Interface ICs	Type	RS-485 Transceiver
Number of receivers	1	Number of transmitters	1
Supply voltage (nom) (V)	5	Signaling rate (max) (MBits)	20
Fault protection (V)	-9 to 14	Common-mode range (V)	-7 to 12
Number of nodes	256	Isolated	No
Supply current (max) (µA)	900	Rating	Catalog
Operating temperature range (°C)	-40 to 85