This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ZSSC4151CE4R

Sensor Interface PQFN / 24 / 4X4MM S1 - TAPE&REEL - 13

Manufacturer:

Renesas Technology Corp
Mfr.Part #:

ZSSC4151CE4R
Datasheet:

ZSSC4151CE4R Datasheet (PDF)
Pkg. Description:

VFQFPN 4.00x4.00x0.90 mm 0.50mm Pitch
Pkg. Code:

NLG24
Lead Count:

24
Length:

4 mm
EDA/CAD Models:

Request Free CAD Models for ZSSC4151CE4R

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ZSSC4151CE4R General Description

The ZSSC4151 is a CMOS integrated circuit for highly accurate amplification and sensor-specific correction of resistive bridge sensor signals. Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity is accomplished via an internal 16-bit RISC microcontroller running a correction algorithm, with calibration coefficients stored in an integrated EEPROM. The ZSSC4151 is adjustable to nearly all resistive bridge sensor types. Measured values are provided at the analog voltage output and at the optional digital I2C or the ZACwire™ interface, also referred to as the one-wire interface (OWI). The digital interfaces can be used for a simple PC-controlled calibration procedure to program a set of calibration coefficients into an on-chip EEPROM. The ZSSC4151 and the calibration equipment communicate digitally, so the noise sensitivity is greatly reduced. Digital calibration helps keep assembly cost low as no trimming by external devices or lasers is needed.

Key Features

Digital compensation of sensor offset, sensitivity, temperature drift, and non-linearity
Adjustable to nearly all full or half bridge sensors
Analog gain of 200, supporting sensors with spans down to 1mV/V using the digital zooming option
Output options: ratiometric 12-bit analog voltage output (e.g., 5-95% or 10-90%) with freely adjustable clamping or ZACwire™ digital one-wire-interface (OWI)
Temperature compensation: internal or external diode, bridge external series resistance, or RTD
Sensor biasing by internal voltage
High voltage and reverse polarity protection up to 40V at all module pins: VDDE, VSSE, and AOUT
Maximum supply current: 7mA
Short-circuit protection for AOUT
Traceability via user-defined registers

Specifications

Pkg. Description:	VFQFPN 4.00x4.00x0.90 mm 0.50mm Pitch	Pkg. Code:	NLG24
Lead Count:	24	Length:	4 mm
Width:	4 mm	Thickness:	0.9 mm
Moisture Sensitivity Bake:	0	Moisture Exposure Floor Life:	Unlimited@<30C/85%RH
Category:	G	Pb (Lead) Free:	Yes
Carrier Type:	Reel	Qty. per Carrier:	0
Pkg. Type:	VFQFPN	Qty. per Reel:	5000
Reel Size:	13	Tape Pin 1 Quad:	1
Tape Pocket Pitch:	8	Moisture Sensitivity Level (MSL):	1
Pkg. Class:	PLASTIC	Re-bake Conditions:	NA
Peak Reflow Temp:	260	Pb Free Category:	e3 Sn