This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

X9317US8IZ

Digital Potentiometer 50k Ohm 1 Circuit 100 Taps Up/Down (U/D, INC, CS) Interface 8-SOIC

Manufacturer:

Renesas Technology Corp
Mfr.Part #:

X9317US8IZ
Datasheet:

X9317US8IZ Datasheet (PDF)
Series:

XDCP™
Programmable:

Not Verified
Taper:

Linear
Configuration:

Potentiometer
EDA/CAD Models:

Request Free CAD Models for X9317US8IZ

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

X9317US8IZ General Description

The X9317 is a digitally controlled potentiometer (XDCP™). The device consists of a resistor array, wiper switches, a control section, and nonvolatile memory. The wiper position is controlled by a 3-wire interface. The potentiometer is implemented by a resistor array composed of 99 resistive elements and a wiper switching network. Between each element and at either end are tap points accessible to the wiper terminal. The position of the wiper element is controlled by the CS, U/D, and INC inputs. The position of the wiper can be stored in nonvolatile memory and then be recalled upon a subsequent power-up operation. The device can be used as a three-terminal potentiometer for voltage control or as a two-terminal variable resistor for current control in a wide variety of applications.

Key Features

Solid-State Potentiometer
3-Wire Serial Up/Down Interface
100 Wiper Tap Points
Wiper Position Stored in Nonvolatile Memory and Recalled on Power-up
99 Resistive Elements
Temperature Compensated
End-to-end Resistance Range ±20%
Low Power CMOS
V_CC = 2.7V to 5.5V, and 5V ±10%
Standby Current <5µA
High Reliability
Endurance, 100,000 Data Changes per Bit
Register Data Retention, 100 years
R_TOTAL Values = 10kΩ, 50kΩ, 100kΩ
Packages
8 Ld SOIC, TSSOP, and MSOP
Pb-Free (RoHS Compliant)

Specifications

Category	Integrated Circuits (ICs)Data AcquisitionDigital Potentiometers	Series	XDCP™
Programmable	Not Verified	Taper	Linear
Configuration	Potentiometer	Number of Circuits	1
Number of Taps	100	Resistance (Ohms)	50k
Interface	Up/Down (U/D, INC, CS)	Memory Type	Non-Volatile
Voltage - Supply	5V	Features	-
Tolerance	±20%	Temperature Coefficient (Typ)	±300ppm/°C
Mounting Type	Surface Mount	Operating Temperature	-40°C ~ 85°C
Resistance - Wiper (Ohms) (Typ)	200	Base Product Number	X9317
Product Category	Digital Potentiometer ICs	Resistance	50 kOhms
Temperature Coefficient	300 PPM / C	Number of POTs	Single
Taps per POT	100	Wiper Memory	Non Volatile
Digital Interface	Serial (3-Wire)	Operating Supply Voltage	5 V
Operating Supply Current	50 uA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Mounting Style	PCB Mount
Termination Style	SMD/SMT	Height	0 mm
Length	4.9 mm	Product Type	Digital Potentiometer ICs
Factory Pack Quantity	100	Subcategory	Digital Potentiometer ICs
Supply Type	Single	Supply Voltage - Max	5.5 V
Supply Voltage - Min	4.5 V	Width	3.9 mm
Unit Weight	0.002540 oz