This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

UPD301BT/KYX

USB Controller USB 3.0 SPI Interface 40-VQFN (6x6)

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

UPD301BT/KYX
Datasheet:

UPD301BT/KYX Datasheet (PDF)
Series:

Automotive, AEC-Q100
Programmable:

Not Verified
Protocol:

USB
Function:

Controller
EDA/CAD Models:

Request Free CAD Models for UPD301BT/KYX

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

UPD301BT/KYX General Description

The UPD301B/C is a stand-alone, small form factor USB Type-C™ Power Delivery (PD) Port Controller compliant with the USB Type-C™ Power Delivery 3.0 Specification. The UPD301B/C provides stand-alone operation for a wide range of PD applications, enabling cable plug orientation and detection for a USB Type-C receptacle, and implementing baseband communication with the connecting USB Type-C device via the integrated USB Power Delivery 3.0 MAC.

The UPD301B/C is an integrated PD solution with the functionality of a SAMD20 (32-bit ARM Cortex-M0+) microcontroller and a UPD350 PD MAC/PHY. Optionally, a second, third, or fourth PD port is supported via SPI connection to additional external Microchip UPD350 devices. The embedded 32-bit ARM Cortex-M0+ executes the Microchip USB Power Delivery Software Framework (PSF) Power Delivery stack. Microchip PSF is available at the Microchip GitHub location. A Quick Start Guide and User Manual are also available on the GitHub page. The UPD301B/C devices are shipped blank and require programming with compiled application specific code before operation. Programming is supported by Microchip's industry standard MPLAB X IDE programming environment.

The PSF firmware stack allows for a wide range of USB Power Delivery applications, including but not limited to: Single or Multi-Port Source Only applications, Bus-Powered Sink applications, Battery-Powered Sink applications, and Dual Role Data / Dual Role Power applications such as PD-based docking stations or PD-based dongles. Charge only applications are support in the UPD301B, while all others are supported in the UPD301C. The PSF firmware stack is a continuously deployed open source stack. Not all features that are able to be supported by the UPD301B/C device are necessarily supported by PSF. The supported features may be expanded over time. Additional feature development or status of basic feature development may be requested through Microchip support channels.

By integrating the PD firmware and many of the analog discrete components required for USB Type-C PD applications, the UPD301B/C provides a flexible, stand-alone, PD solution for designers who wish to integrate the PD operation with a system controller, implement a custom power supply circuit, support unique PDOs or charging algorithms, or simply control their own PD code.

Key Features

USB Type-C™ (1) Power Delivery (PD) Solution for
- Source-only applications (UPD301B)
- Source-only, Sink-only, Dual Role Power, and Dual Role Data applications (UPD301C)
• Companion device for USB PD Software Framework (PSF) open source firmware stack
• Fully Customizable software
• Standard Power Delivery power profiles (15/27/45/60/100W) supported with no software modification
• USB Power Delivery 3.0 compliant MAC
• USB Type-C™ connector support with connection detection and control
• Integrated Analog Discrete Components Reduce Bill of Materials and Design Footprint
• Easily Supports up to 3 additional Power Delivery ports Port via UPD350 Add-on
• Commercial, Industrial, and Automotive Temperature Support

Microchip Technology, Inc Original Stock

Specifications

Category	Integrated Circuits (ICs)InterfaceControllers	Series	Automotive, AEC-Q100
Programmable	Not Verified	Protocol	USB
Function	Controller	Interface	SPI
Standards	USB 3.0	Voltage - Supply	1.62V ~ 1.98V, 2.97V ~ 3.63V, 4.75V ~ 5.25V
Current - Supply	23.84mA	Operating Temperature	0°C ~ 70°C (TA)
Base Product Number	UPD301	Product Category	USB Interface IC
Product	USB Controllers	Type	USB Type-C
Mounting Style	SMD/SMT	Standard	USB-C 3.0
Supply Voltage - Min	4.75 V	Supply Voltage - Max	5.25 V
Operating Supply Current	23.84 mA	Minimum Operating Temperature	0 C
Maximum Operating Temperature	+ 70 C	Interface Type	SPI
Operating Supply Voltage	4.75 V to 5.25 V	Product Type	USB Interface IC
Factory Pack Quantity	3000	Subcategory	Interface ICs