This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TUSB1210BRHBR

High-speed 480-Mbps USB 2.0 OTG transceiver

Manufacturer:

TI
Mfr.Part #:

TUSB1210BRHBR
Datasheet:

TUSB1210BRHBR Datasheet (PDF)
Function:

USB2
USB speed (MBits):

480
Type:

Transceiver
Supply voltage (V):

1.1, 3.3
EDA/CAD Models:

Request Free CAD Models for TUSB1210BRHBR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TUSB1210BRHBR General Description

The TUSB1210 is a USB2.0 transceiver chip, designed to interface with a USB controller through a ULPI interface. The device supports all USB2.0 data rates (high-speed 480 Mbps, full-speed 12 Mbps, and low-speed 1.5 Mbps), and is compliant to both host and peripheral modes. The device additionally supports a UART mode and legacy ULPI serial modes. TUSB1210 also supports the OTG (Ver1.3) optional addendum to the USB 2.0 Specification, including HNP and SRP.

The DP/DM external component compensation in the transmitter compensates for variations in the series impendence in order to match with the data line impedance and the receiver input impedance, to limit data reflections and thereby improve eye diagrams.

Key Features

USB2.0 PHY transceiver chip, designed to interface with a USB controller through a ULPI interface, fully compliant with:
- Universal serial bus specification Rev. 2.0
- On-the-go supplement to the USB 2.0 specification Rev. 1.3
- UTMI+ low pin interface (ULPI) specification Rev. 1.1
- ULPI 12-pin SDR interface
DP/DM line external component compensation (patent #US7965100 B1)
Interfaces to host, peripheral and OTG device cores; optimized for portable devices or system ASICs with built-in USB OTG device core
Complete USB OTG physical front-end that supports host negotiation protocol (HNP) and session request protocol (SRP)
V_BUS overvoltage protection circuitry protects V_BUS pin in range –2 V to 20 V
Internal 5-V short-circuit protection of DP, DM, and ID pins for cable shorting to V_BUS pin
ULPI interface:
- I/O interface (1.8 V) optimized for nonterminated 50 Ω line impedance
- ULPI CLOCK pin (60 MHz) supports input and output clock configurations
- Fully programmable ULPI-compliant register set
Full industrial grade operating temperature range from –40°C to 85°C
Available in a 32-pin quad flat no lead [QFN (RHB)] package

Specifications

Function	USB2	USB speed (MBits)	480
Type	Transceiver	Supply voltage (V)	1.1, 3.3
Rating	Catalog	Operating temperature range (°C)	-40 to 85