Payment Method
TLV9002IDGKR
Dual, 5.5-V, 1-MHz, RRIO operational amplifier for cost-optimized applications
-
Manufacturer:
-
Mfr.Part #:
TLV9002IDGKR
-
Datasheet:
-
Number of channels:
2
-
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V):
5.5
-
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V):
1.8
-
Rail-to-rail:
In, Out
-
EDA/CAD Models:
Availability: 6837 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TLV9002IDGKR General Description
The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.
The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.
The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA.
Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.
Key Features
- Scalable CMOS amplifier for low-cost applications
- Rail-to-rail input and output
- Low input offset voltage: ±0.4 mV
- Unity-gain bandwidth: 1 MHz
- Low broadband noise: 27 nV/√Hz
- Low input bias current: 5 pA
- Low quiescent current: 60 µA/Ch
- Unity-gain stable
- Internal RFI and EMI filter
- Operational at supply voltages as low as 1.8 V
- Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
- Extended temperature range: –40°C to 125°C
Specifications
Number of channels | 2 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 5.5 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 1.8 | Rail-to-rail | In, Out |
GBW (typ) (MHz) | 1 | Slew rate (typ) (V/µs) | 2 |
Vos (offset voltage at 25°C) (max) (mV) | 1.5 | Iq per channel (typ) (mA) | 0.06 |
Vn at 1 kHz (typ) (nV√Hz) | 30 | Rating | Catalog |
Operating temperature range (°C) | -40 to 125 | Offset drift (typ) (µV/°C) | 0.6 |
Features | Cost Optimized, EMI Hardened, Shutdown, Small Size | CMRR (typ) (dB) | 90 |
Iout (typ) (A) | 0.04 | Architecture | CMOS |
Input common mode headroom (to negative supply) (typ) (V) | -0.1 | Input common mode headroom (to positive supply) (typ) (V) | 0.1 |
Output swing headroom (to negative supply) (typ) (V) | 0.01 | Output swing headroom (to positive supply) (typ) (V) | -0.01 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 6837 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TLV9002IDGKR, guaranteed quotes back within 12hr.