This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TLV9001SIDBVR

One-channel, 1-MHz rail-to-rail input and output 1.8-V to 5.5-V operational amplifier

Manufacturer:

TI
Mfr.Part #:

TLV9001SIDBVR
Datasheet:

TLV9001SIDBVR Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for TLV9001SIDBVR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TLV9001SIDBVR General Description

The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.

The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.

The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA.

Micro-size packages, such as SOT-553 and WSON, are offered for all channel variants (single, dual, and quad), along with industry-standard packages such as SOIC, MSOP, SOT-23, and TSSOP packages.

Key Features

Scalable CMOS amplifier for low-cost applications
Rail-to-rail input and output
Low input offset voltage: ±0.4 mV
Unity-gain bandwidth: 1 MHz
Low broadband noise: 27 nV/√Hz
Low input bias current: 5 pA
Low quiescent current: 60 µA/Ch
Unity-gain stable
Internal RFI and EMI filter
Operational at supply voltages as low as 1.8 V
Easier to stabilize with higher capacitive load due to resistive open-loop output impedance
Extended temperature range: –40°C to 125°C

Specifications

Source Content uid	TLV9001SIDBVR	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.33.00.01
Amplifier Type	OPERATIONAL AMPLIFIER	Architecture	VOLTAGE-FEEDBACK
Common-mode Reject Ratio-Min	63 dB	Common-mode Reject Ratio-Nom	95 dB
Frequency Compensation	YES	Input Offset Voltage-Max	1600 µV
JESD-30 Code	R-PDSO-G6	JESD-609 Code	e4
Length	2.9 mm	Low-Bias	YES
Low-Offset	NO	Micropower	YES
Moisture Sensitivity Level	1	Number of Functions	1
Number of Terminals	6	Operating Temperature-Max	125 °C
Operating Temperature-Min	-40 °C	Packing Method	TR
Peak Reflow Temperature (Cel)	260	Power	NO
Programmable Power	NO	Seated Height-Max	1.45 mm
Slew Rate-Nom	2 V/us	Supply Current-Max	0.077 mA
Supply Voltage Limit-Max	6 V	Supply Voltage-Nom (Vsup)	5 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	AUTOMOTIVE	Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Form	GULL WING	Terminal Pitch	0.95 mm
Terminal Position	DUAL	Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Unity Gain BW-Nom	1000	Voltage Gain-Min	158489
Wideband	NO	Width	1.6 mm