This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

TLV2475CN

Quad, 6-V, 2.8-MHz operational amplifier

Manufacturer:

Texas Instruments
Mfr.Part #:

TLV2475CN
Datasheet:

TLV2475CN Datasheet (PDF)
Series:

TLV2475
Number of Channels:

4 Channel
GBP - Gain Bandwidth Product:

2.8 MHz
SR - Slew Rate:

1.5 V/us
EDA/CAD Models:

Request Free CAD Models for TLV2475CN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

TLV2475CN General Description

The TLV247x is a family of CMOS rail-to-rail input/ outputoperational amplifiers that establishes a new performance point for supply current versus ac performance. These devices consume just 600µA/channel while offering 2.8MHz of gain-bandwidth product. Along with increased ac performance, the amplifier provides high output drive capability, solving a major shortcoming of older micropower operational amplifiers. The TLV247x can swing to within 180mV of each supply rail while driving a 10mA load. For non-RRO applications, the TLV247x can supply ±35mA at 500mV off the rail. Both the inputs and outputs swing rail-to-rail for increased dynamic range in low-voltage applications. This performance makes the TLV247x family ideal for sensor interface, portable medical equipment, and other data acquisition circuits.

Key Features

CMOS Rail-To-Rail Input/Output
Input Bias Current: 2.5pA
Low Supply Current: 600µA/Channel
Ultra-Low Power Shutdown Mode:
- I_DD(SHDN): 350nA/ch at 3V
- I_DD(SHDN): 1000nA/ch at 5V
Gain-Bandwidth Product: 2.8MHz
High Output Drive Capability:
- ±10mA at 180mV
- ±35mA at 500mV
Input Offset Voltage: 250µV (typ)
Supply Voltage Range: 2.7V to 6V
Ultra-Small Packaging
- SOT23-5 or -6 (TLV2470/1)
- MSOP-8 or -10 (TLV2472/3)

PowerPAD is a trademark of Texas Instruments.
Microsim PARTS is a trademark of MicroSim Corporation.
Microsim PSpice is a registered trademark of MicroSim Corporation.
All other trademarks are the property of their respective owners.

Specifications

Product Category	Precision Amplifiers	Series	TLV2475
Number of Channels	4 Channel	GBP - Gain Bandwidth Product	2.8 MHz
SR - Slew Rate	1.5 V/us	CMRR - Common Mode Rejection Ratio	78 dB
Output Current per Channel	35 mA	Ib - Input Bias Current	2.5 pA
Vos - Input Offset Voltage	250 uV	en - Input Voltage Noise Density	15 nV/sqrt Hz
Supply Voltage - Max	6 V	Supply Voltage - Min	2.7 V
Operating Supply Current	600 uA	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C	Shutdown	Shutdown
Mounting Style	Through Hole	Amplifier Type	Low Noise Amplifier
Features	Shutdown	Height	4.57 mm
In - Input Noise Current Density	0.39 pA/sqrt Hz	Input Type	Rail-to-Rail
Length	19.3 mm	Maximum Dual Supply Voltage	+/- 3 V
Minimum Dual Supply Voltage	+/- 1.35 V	Operating Supply Voltage	2.7 V to 6 V, +/- 1.35 V to +/- 3 V
Output Type	Rail-to-Rail	Pd - Power Dissipation	1.6 W
Product	Precision Amplifiers	Product Type	Precision Amplifiers
Factory Pack Quantity	25	Subcategory	Amplifier ICs
Supply Type	Single, Dual	Technology	CMOS
Vcm - Common Mode Voltage	Negative Rail to Positive Rail	Voltage Gain dB	120 dB
Width	6.35 mm	Unit Weight	0.033570 oz