Payment Method
TLV2252IDR
Operational amplifiers featuring dual rail-to-rail functionality with low voltage and power consumption
-
Manufacturer:
-
Mfr.Part #:
TLV2252IDR
-
Datasheet:
-
Number of channels:
2
-
Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V):
8
-
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V):
2.7
-
Vos (offset voltage at 25°C) (max) (mV):
1.5
-
EDA/CAD Models:
Availability: 5355 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TLV2252IDR General Description
The TLV2252 and TLV2254 are dual and quadruple low-voltage operational amplifiers from Texas Instruments. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLV225x family consumes only 34 µA of supply current per channel. This micropower operation makes them good choices for battery-powered applications. This family is fully characterized at 3 V and 5 V and is optimized for low-voltage applications. The noise performance has been dramatically improved over previous generations of CMOS amplifiers. The TLV225x has a noise level of 19 nV/Hz at 1kHz, four times lower than competitive micropower solutions.
The TLV225x, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels combined with 3-V operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV225xA family is available and has a maximum input offset voltage of 850 µV.
The TLV2252/4 also make great upgrades to the TLV2322/4 in standard designs. They offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows them to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432 and TLV2442 devices. If your design requires single amplifiers, please see the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.
Key Features
- Output Swing Includes Both Supply Rails
- Low Noise.19 nV/Hz Typ at f = 1 kHz
- Low Input Bias Current.1 pA Typ
- Fully Specified for Both Single-Supply and Split-Supply Operation
- Very Low Power.34 µA Per Channel Typ
- Common-Mode Input Voltage Range Includes Negative Rail
- Low Input Offset Voltage
850 µV Max at TA = 25°C - Wide Supply Voltage Range
2.7 V to 8 V - Macromodel Included
- Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control / Print Support
Qualification to Automotive Standards
Advanced LinCMOS is a trademark of Texas Instruments.
Specifications
Number of channels | 2 | Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) | 8 |
Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) | 2.7 | Vos (offset voltage at 25°C) (max) (mV) | 1.5 |
GBW (typ) (MHz) | 0.2 | Features | High Cload Drive |
Slew rate (typ) (V/µs) | 0.12 | Rail-to-rail | In to V-, Out |
Offset drift (typ) (µV/°C) | 0.5 | Iq per channel (typ) (mA) | 0.035 |
Vn at 1 kHz (typ) (nV√Hz) | 19 | CMRR (typ) (dB) | 83 |
Rating | Catalog | Operating temperature range (°C) | -40 to 125 |
Input bias current (max) (pA) | 60 | Iout (typ) (A) | 0.008 |
Architecture | CMOS | Input common mode headroom (to negative supply) (typ) (V) | -0.3 |
Input common mode headroom (to positive supply) (typ) (V) | -0.8 | Output swing headroom (to negative supply) (typ) (V) | 0.01 |
Output swing headroom (to positive supply) (typ) (V) | -0.06 | THD + N at 1 kHz (typ) (%) | 0.2 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5355 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $1.185 | $1.18 |
10+ | $1.007 | $10.07 |
30+ | $0.910 | $27.30 |
100+ | $0.800 | $80.00 |
500+ | $0.753 | $376.50 |
1000+ | $0.729 | $729.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TLV2252IDR, guaranteed quotes back within 12hr.