Payment Method
TLC27M7CDR
Dual, precision single supply low-power operational amplifier
-
Manufacturer:
Texas Instruments
-
Mfr.Part #:
TLC27M7CDR
-
Datasheet:
-
Series:
TLC27M7
-
Number of Channels:
2 Channel
-
GBP - Gain Bandwidth Product:
635 kHz
-
SR - Slew Rate:
620 mV/us
-
EDA/CAD Models:
Availability: 5320 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TLC27M7CDR General Description
The TLC27M2 and TLC27M7 dual operational amplifiers combine a wide range of input offset voltage grades with low offset voltage drift, high input impedance, low noise, and speeds approaching that of general-purpose bipolar devices.These devices use Texas Instruments silicon-gate LinCMOS technology, which provides offset voltage stability far exceeding the stability available with conventional metal-gate processes.
The extremely high input impedance, low bias currents, and high slew rates make these cost-effective devices ideal for applications which have previously been reserved for general-purpose bipolar products, but with only a fraction of the power consumption. Four offset voltage grades are available (C-suffix and I-suffix types), ranging from the low-cost TLC27M2 (10 mV) to the high-precision TLC27M7 (500 µV). These advantages, in combination with good common-mode rejection and supply voltage rejection, make these devices a good choice for new state-of-the-art designs as well as for upgrading existing designs.
In general, many features associated with bipolar technology are available on LinCMOS operational amplifiers, without the power penalties of bipolar technology. General applications such as transducer interfacing, analog calculations, amplifier blocks, active filters, and signal buffering are easily designed with the TLC27M2 and TLC27M7. The devices also exhibit low voltage single-supply operation, making them ideally suited for remote and inaccessible battery-powered applications. The common-mode input voltage range includes the negative rail.
A wide range of packaging options is available, including small-outline and chip-carrier versions for high-density system applications.
The device inputs and outputs are designed to withstand 100-mA surge currents without sustaining latch-up.
The TLC27M2 and TLC27M7 incorporate internal ESD-protection circuits that prevent functional failures at voltages up to 2000 V as tested under MIL-STD-883C, Method 3015.2; however, care should be exercised in handling these devices as exposure to ESD may result in the degradation of the device parametric performance.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized for operation from 40°C to 85°C. The M-suffix devices are characterized for operation over the full military temperature range of 55°C to 125°C.
Key Features
- Trimmed Offset Voltage:
- TLC27M7.500 µV Max at 25°C,
VDD = 5 V
- TLC27M7.500 µV Max at 25°C,
- Input Offset Voltage Drift.Typically
0.1 µV/Month, Including the First 30 Days - Wide Range of Supply Voltages Over
Specified Temperature Ranges:- 0°C to 70°C.3 V to 16 V
- –40°C to 85°C.4 V to 16 V
- –55°C to 125°C.4 V to 16 V
- Single-Supply Operation
- Common-Mode Input Voltage Range Extends Below
the Negative Rail (C-Suffix, I-Suffix Types) - Low Noise.Typically 32 nV/ Hz at f = 1 kHz
- Low Power.Typically 2.1 mW at 25°C, VDD = 5 V
- Output Voltage Range Includes Negative Rail
- High Input impedance.1012 Typ
- ESD-Protection Circuitry
- Small-Outline Package Option Also Available in Tape and Reel
- Designed-In Latch-Up Immunity
LinCMOS is a trademark of Texas Instruments Incorporated.
All other trademarks are the property of their respective owners.
Specifications
Product Category | Precision Amplifiers | Series | TLC27M7 |
Number of Channels | 2 Channel | GBP - Gain Bandwidth Product | 635 kHz |
SR - Slew Rate | 620 mV/us | CMRR - Common Mode Rejection Ratio | 91 dB |
Output Current per Channel | 30 mA | Ib - Input Bias Current | 0.7 pA |
Vos - Input Offset Voltage | 190 uV | en - Input Voltage Noise Density | 32 nV/sqrt Hz |
Supply Voltage - Max | 16 V, 8 V | Supply Voltage - Min | 3 V, +/- 1.5 V |
Operating Supply Current | 285 uA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Shutdown | No Shutdown |
Mounting Style | SMD/SMT | Amplifier Type | Low Power Amplifier |
Height | 1.58 mm | Input Type | Rail-to-Rail |
Length | 4.9 mm | Minimum Dual Supply Voltage | +/- 1.5 V |
Operating Supply Voltage | 3 V to 16 V, +/- 1.5 V to +/- 8 V | Pd - Power Dissipation | 725 mW |
Product | Precision Amplifiers | Product Type | Precision Amplifiers |
Factory Pack Quantity | 2500 | Subcategory | Amplifier ICs |
Supply Type | Single, Dual | Technology | LinCMOS |
Tradename | LinCMOS | Voltage Gain dB | 104.61 dB |
Width | 3.91 mm | Unit Weight | 0.002677 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5320 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TLC27M7CDR, guaranteed quotes back within 12hr.