Payment Method
TLC2274AQPWRG4Q1
General Purpose Amplifier 4 Circuit Rail-to-Rail 14-TSSOP
-
Manufacturer:
-
Mfr.Part #:
TLC2274AQPWRG4Q1
-
Datasheet:
-
Series:
Automotive, AEC-Q100, LinCMOS™
-
Amplifier Type:
General Purpose
-
Number of Circuits:
4
-
Output Type:
Rail-to-Rail
-
EDA/CAD Models:
Availability: 5409 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TLC2274AQPWRG4Q1 General Description
The TLC227x-Q1 are dual and quad, LinCMOS™ operational amplifiers. Both devices exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. The TLC227x-Q1 family offers 2 MHz of bandwidth and 3 V/µs of slew rate for higher-speed applications. These devices offer comparable ac performance while having better noise, input offset voltage, and power dissipation than existing CMOS op amps. The TLC227x‑Q1 has a noise voltage of 9 nV/√Hz—two times lower than competitive solutions.
The TLC227x-Q1, exhibiting high input impedance and low noise, are excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. In addition, the rail-to-rail output feature, with single- or split-supplies, makes this family a great choice when interfacing with analog-to-digital converters (ADCs).
For precision applications, the TLC227xA-Q1 family is available with a maximum input offset voltage of 950 µV. This family is fully characterized at 5 V and ±5 V.
These devices offer increased output dynamic range, lower noise voltage, and lower input offset voltage. This enhanced feature set allows the TLC227x-Q1 to be used in a wider range of applications. For applications that require higher output drive and wider input voltage range, see the TLV2432-Q1 and TLV2442-Q1. All the parameters of the TLC227x-Q1 family enables these devices to be applicable in most automotive applications.
Key Features
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to 125°C, TA
- Functional Safety-Capable
- Documentation available to aid functional safety system design (TLC2272-Q1)
- Documentation available to aid functional safety system design (TLC2272A-Q1)
- Output swing includes both supply rails
- Low noise: 9 nV/√Hz typical at f = 1 kHz
- Low input bias current: 1 pA typical
- Fully specified for both single-supply and split-supply operation
- Common-mode input voltage range includes negative rail
- High-gain bandwidth: 2.2 MHz typical
- High slew rate: 3.6 V/µs typical
- Low input offset voltage: 950 µV maximum at TA = 25°C
- Macromodel included
Specifications
Category | Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps | Series | Automotive, AEC-Q100, LinCMOS™ |
Amplifier Type | General Purpose | Number of Circuits | 4 |
Output Type | Rail-to-Rail | Slew Rate | 3.6V/µs |
Gain Bandwidth Product | 2.25 MHz | Current - Input Bias | 1 pA |
Voltage - Input Offset | 300 µV | Current - Supply | 4.8mA (x4 Channels) |
Current - Output / Channel | 50 mA | Voltage - Supply Span (Min) | 4.4 V |
Voltage - Supply Span (Max) | 16 V | Operating Temperature | -40°C ~ 125°C |
Mounting Type | Surface Mount | Base Product Number | TLC2274 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5409 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TLC2274AQPWRG4Q1, guaranteed quotes back within 12hr.