This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SST25VF080B-50-4C-S2AF

8Mb 2.7-3.6V SPI Serial Flash.

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

SST25VF080B-50-4C-S2AF
Datasheet:

SST25VF080B-50-4C-S2AF Datasheet (PDF)
Series:

SST25
Memory Type:

Non-Volatile
Memory Format:

FLASH
Technology:

FLASH
EDA/CAD Models:

Request Free CAD Models for SST25VF080B-50-4C-S2AF

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SST25VF080B-50-4C-S2AF General Description

The SST25VF080B devices are enhanced with improved operating frequency for lower power consumption. SST25VF080B SPI serial flash memories are manufactured with SST's proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.

Key Features

Single Voltage Read and Write Operations– 2.7-3.6V
Supports 50 MHz SPI clock (80 MHz no longer available see EOL NOTIFICATION)
Endurance: 100,000 Cycles (typical)
Greater than 100 years Data Retention
Program & Erase Current: 30mA (max)
Active Read Current: 10 mA (typical)
Standby Current: 5 µA (typical)
Uniform 4 KByte sectors
Uniform 32 KByte & 64 KByte overlay blocks
Chip-Erase Time: 35 ms (typical)
Sector-/Block-Erase Time: 18 ms (typical)
Byte-Program Time: 7 µs (typical)
Decrease total chip programming time over Byte-Program operations
Software polling the BUSY bit in Status Register
Busy Status readout on SO pin in AAI Mode
Suspends a serial sequence to the memory without deselecting the device
Enables/Disables the Lock-Down function of the status register
Write protection through Block-Protection bits in the status register
Commercial: 0°C to +70°C
Industrial: -40°C to +85°C
Packages Available– 8-lead SOIC (200 mils)– 8-contact WSON (6mm x 5mm)– 8-lead PDIP (300 mils)– 8-bump CSP
All devices are RoHS compliant

Specifications

Category	Integrated Circuits (ICs)MemoryMemory	Series	SST25
Memory Type	Non-Volatile	Memory Format	FLASH
Technology	FLASH	Memory Size	8Mbit
Memory Organization	1M x 8	Memory Interface	SPI
Clock Frequency	50 MHz	Write Cycle Time - Word, Page	10µs
Voltage - Supply	2.7V ~ 3.6V	Operating Temperature	0°C ~ 70°C (TA)
Mounting Type	Surface Mount	Base Product Number	SST25VF080
Product Category	NOR Flash	Mounting Style	SMD/SMT
Supply Voltage - Min	2.7 V	Supply Voltage - Max	3.6 V
Active Read Current - Max	15 mA	Interface Type	SPI
Maximum Clock Frequency	50 MHz	Organization	1 M x 8
Data Bus Width	8 bit	Timing Type	Synchronous
Minimum Operating Temperature	0 C	Maximum Operating Temperature	+ 70 C
Architecture	Sector	Moisture Sensitive	Yes
Product Type	NOR Flash	Speed	50 MHz
Standard	Not Supported	Factory Pack Quantity	90
Subcategory	Memory & Data Storage	Unit Weight	0.019048 oz