This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

SN65LVDT101DR

Buffer, ReDriver 1 Channel 2Gbps 8-SOIC

Manufacturer:

Texas Instruments
Mfr.Part #:

SN65LVDT101DR
Datasheet:

SN65LVDT101DR Datasheet (PDF)
Type:

Repeater/Translator
Number of Drivers:

1 Driver
Number of Receivers:

1 Receiver
Data Rate:

2 Gb/s
EDA/CAD Models:

Request Free CAD Models for SN65LVDT101DR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

SN65LVDT101DR General Description

The SN65LVDS100, SN65LVDT100, SN65LVDS101, and SN65LVDT101 are high-speed differential receivers and drivers connected as repeaters. The receiver accepts low-voltage differential signaling (LVDS), positive-emitter-coupled logic (PECL), or current-mode logic (CML) input signals at rates up to 2 Gbps and repeats it as either an LVDS or PECL output signal. The signal path through the device is differential for low radiated emissions and minimal added jitter.

The outputs of the SN65LVDS100 and SN65LVDT100 are LVDS levels as defined by TIA/EIA-644-A. The outputs of the SN65LVDS101 and SN65LVDT101 are compatible with 3.3-V PECL levels. Both drive differential transmission lines with nominally 100-Ω characteristic impedance.

The SN65LVDT100 and SN65LVDT101 include a 110-Ω differential line termination resistor for less board space, fewer components, and the shortest stub length possible. They do not include the V_BB voltage reference found in the SN65LVDS100 and SN65LVDS101. V_BB provides a voltage reference of typically 1.35 V below V_CC for use in receiving single-ended input signals and is particularly useful with single-ended 3.3-V PECL inputs. When V_BB is not used, it should be unconnected or open.

All devices are characterized for operation from –40°C to 85°C.

Key Features

Designed for Signaling Rates ≥ 2 Gbps
Total Jitter < 65 ps
Low-Power Alternative for the MC100EP16
Low 100-ps (Maximum) Part-to-Part Skew
25 mV of Receiver Input Threshold Hysteresis
Over 0-V to 4-V Input Voltage Range
Inputs Electrically Compatible With LVPECL,
CML, and LVDS Signal Levels
3.3-V Supply Operation
LVDT Integrates 110-Ω Terminating Resistor
Offered in SOIC and MSOP

Specifications

Product Category	LVDS Interface IC	Type	Repeater/Translator
Number of Drivers	1 Driver	Number of Receivers	1 Receiver
Data Rate	2 Gb/s	Input Type	CML, LVDS, LVPECL
Output Type	LVPECL	Supply Voltage - Max	3.6 V
Supply Voltage - Min	3 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Mounting Style	SMD/SMT
Height	1.58 mm	Input Voltage, Max	100 mV
Input Voltage, Min	- 100 mV	Length	4.9 mm
Maximum Output Voltage	454 mV	Operating Supply Current	90 mA
Operating Supply Voltage	3.3 V	Pd - Power Dissipation	481 mW
Product Type	LVDS Interface IC	Propagation Delay Time	0.9 ns
Series	SN65LVDT101	Factory Pack Quantity	2500
Subcategory	Interface ICs	Width	3.91 mm
Unit Weight	0.002677 oz