This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

RN171-I/RM400

Module 802.11b/g 2.462GHz 11000Kbps 49-Pin SMD Module Tray

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

RN171-I/RM400
Datasheet:

RN171-I/RM400 Datasheet (PDF)
GPIO:

14
ADC Channels:

0
ADC Resolution:

0
Encryption:

AES128
EDA/CAD Models:

Request Free CAD Models for RN171-I/RM400

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

RN171-I/RM400 General Description

This product is not recommended for new designs-consider using the ATWINC1500 as an alternative. View our RN Wi-Fi Migration Guide for more information on making the transition.

Important Note:

We assessed the RN171 against the new RED Directive EN 300 328 v2.2.2 standard and the module cannot meet this new standard due to new, more rigorous test limits with which the radio cannot meet the minimum performance criterion. This means that going forward, the device is not compliant for operation within countries that require this standard.

Firmware version 4.81 is the latest production firmware version available for the RN171. To receive the latest firmware version 4.81, please order part number RN171-I/RM481. For more information about firmware version 4.81, please see the Release Notes.

Firmware version 4.83 provides fixes for the Key Reinstallation attack or 'Krack' vulnerability. The Firmware and Release notes are available under the Documentation tab.

The RN171 is a small form factor, ultra-low power embedded TCP/IP module measuring only 27 x 18 x 3.1 mm. The RN171, like the RN131, is a full-featured 802.11 b/g surface mount module. Due to its small form factor and extremely low power consumption, it is perfect for mobile wireless applications such as asset monitoring, sensors, and portable battery operated devices.

For quickly and easily evaluating the RN171 module, Microchip offers the RN-171-EK, a compact, battery and USB-powered kit with push buttons for SoftAP and WPS mode.

For the latest firmware details and corresponding part numbers, please visit: www.microchip.com/wireless

Key Features

Ultra-low power for battery powered applications
Firmware configurable transmit power: 0dBm to +12dBm
Hardware interfaces: UART and SPI Slave
Supports SoftAP and infrastructure networking modes
RF pad for external antenna
User programmable GPIO & ADCs
Real-time clock for time-stamping, auto-sleep, and auto-wakeup modes
Run directly from batteries or regulated power supplies
Configuration over serial or wireless interface using simple ASCII commands
Over the air firmware upgrade
Secure Wi-Fi authentication schemes (WEP/WPA/WPA2)
Full onboard TCP/IP stack (no external drivers required)

Microchip Technology, Inc Original Stock

Specifications

GPIO	14	ADC Channels	0
ADC Resolution	0	Encryption	AES128
Operating Temp (°C)	-40 to 85	Operating Voltage (V)	1.8V to 3.3V
Frequency Range	2.405-2.48	feature-packaging	Tray
feature-rad-hard		feature-pin-count	49
feature-cecc-qualified	No	feature-esd-protection
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-auto-motive	No
feature-p-pap	No	feature-eccn-code	5A992.c
feature-svhc		feature-svhc-exceeds-threshold	No