This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

PIC32MZ1025DAR169-I/6J

32-bit Microcontrollers - MCU 32-bit cache-based MCU, Graphics Integrated, stacked DDR2

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

PIC32MZ1025DAR169-I/6J
Datasheet:

PIC32MZ1025DAR169-I/6J Datasheet (PDF)
Series:

PIC® 32MZ DAR
Core Processor:

MIPS32® microAptiv™
Core Size:

32-Bit Single-Core
Speed:

200MHz
EDA/CAD Models:

Request Free CAD Models for PIC32MZ1025DAR169-I/6J

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

PIC32MZ1025DAR169-I/6J General Description

PIC32MZ DA series offers MPU like performance with ease of design of an MCU for GUI designs with it’s 2MB Flash and 640KB of SRAM, available on-chip 32MB or 128MB externally addressable DDR2 DRAM, integrated Graphics Controller, Graphics Processor, 200 MHz speed, 12-bit 18 MSPS ADC module with up to 45 analog inputs, CAN and HS USB.

Microchip Technology, IncMicrosoft.AspNetCore.Mvc.Localization.LocalizedHtmlString

Key Features

200 MHz/330 DMIPS, MIPS32 microAptiv core
Dual Panel Flash for live update support
12-bit, 18 MSPS, 45-channel ADC module
Memory Management Unit for optimum embedded OS execution
microMIPS mode for up to 35% code compression
CAN, UART, I2C, PMP, EBI, SQI & Analog Comparators
SPI/I2S interfaces for audio processing and playback
Hi-Speed USB Device/Host/OTG
10/100 Mbps Ethernet MAC with MII and RMII interface
Advanced Memory Protection
- Peripheral and memory region access control
Temperature Range - 40°C to 85°C, - 40°C to 105°C (planned)

Microcontroller Features

Operating voltage range of 2.3V to 3.6V
1MB Flash memory (plus an additional 160 KB of Boot Flash)
256KB SRAM memory
microMIPS mode for up to 35% smaller code size
DSP-enhanced core:
- Four 64-bit accumulators
- Single-cylce MAC, saturating and fractional math
- IEEE 754-compliant

Code-efficient (C and Assembly) architecture

Power Management

Various power management options for extreme power reduction (VBAT, Deep Sleep, Sleep and Idle)
Deep Sleep current: < 1µA (typical)
Integrated POR and BOR
Programmable High/Low-Voltage Detect (HLVD) on VDDIO and High-Voltage Detect (HVD) on VDDR1V8

Clock Management

Programmable PLLs and oscillator clock sources
Dedicated PLL for DDR2
Fail-Safe Clock Monitor

Independent Watchdog and Deadman Timers
Fast wake-up and start-up

Peripheral Features

Internal DDR2 SDRAM interface (up to DDR2-400) with onboard 32MB SDRAM
50 MHz SD/SDIO/eMMC bus interface
50 MHz External Bus Interface (EBI)
80 MHz Serial Quad Interface (SQI)
Peripheral Pin Select (PPS) functionality to enable function remap
Up to 8 channels of hardware DMA with automatic data size detection
Six UART modules (25 Mbps): Supports LIN 1.2 and IrDA protocols

Two CAN modules 2.0B Active with DeviceNet addressing support
Six 4-wire SPI modules (80 Mbps)
SQI configurable as an additional SPI module (50 MHz)
Five I2C modules (up to 1 Mbaud) with SMBus support
Parallel Master Port (PMP)

Hardware Real-Time Clock and Calendar (RTCC) module
Nine 16-bit Timers/Counters (four 16-bit pairs combine to create four 32-bit timers)
Nine Input Capture (IC) and Nine Output Compare(OC)/PWM outputs

Graphics Features

3-layer Graphics Controller with up to 24-bit color support
High-performance 2D Graphics Processing Unit (GPU)

Audio Features

Audio data communication: I2S, LJ, RJ, USB
Audio data control interface: SPI and I2C™
Audio data master clock: Fractional clock frequencies with USB synchronization

Advanced Analog Features

12-bit ADC Module:

18Msps rate with six Sample and Hold (S&H) circuits (five dedicated and one shared)
Up to 45 analog inputs
Can operate during sleep and idle modes
Multiple trigger sources
Six digital comparators and six digital filters

Two comparators with 32 programmable voltage references
Temperature sensor with ±2°C accuracy
Charge Time Measurement Unit (CTMU)

Qualification and Class B Support

AEC-Q100 REVG (Grade 2 -40oC to +105oC) (Planned)
Class B Safety Library, IEC 60730
Back-up internal oscillator

Debugger Development Support

In-circuit and in-application programming
4-wire MIPS® Enhanced JTAG interface
Unlimited program and 12 complex data breakpoints
IEEE 1149.2-compatible (JTAG) boundary scan
Non-intrusive hardware-based instruction trace

Integrated Software Libraries and Tools

MPLAB Harmony – PIC32 software development framework
C/C++ compiler with native DSP/fractional and FPU support
TCP/IP, USB, Graphics, and mTouch middleware
MFi, Android, and Bluetooth audio frameworks
RTOS Kernels, Express Logic ThreadX FreeRTOS, OPENRTOS, Micriµm, µC/OS and SEGGER embOS

Specifications

Category	Integrated Circuits (ICs)EmbeddedMicrocontrollers	Series	PIC® 32MZ DAR
Core Processor	MIPS32® microAptiv™	Core Size	32-Bit Single-Core
Speed	200MHz	Connectivity	CANbus, EBI/EMI, Ethernet, I²C, IrDA, LINbus, PMP, SPI, SQI, UART/USART, USB OTG
Peripherals	Brown-out Detect/Reset, DMA, HLVD, I²S, POR, PWM, WDT	Number of I/O	120
Program Memory Size	1MB (1M x 8)	Program Memory Type	FLASH
EEPROM Size	-	RAM Size	256K x 8 + 32MB DDR2 SDRAM
Voltage - Supply (Vcc/Vdd)	1.7V ~ 1.9V	Data Converters	A/D 45x12b
Oscillator Type	Internal	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	PIC32MZ1025DAR169
Product Category	32-bit Microcontrollers - MCU	Mounting Style	SMD/SMT
Core	MIPS32 microAptiv	Data RAM Size	256 kB
Data Bus Width	32 bit	ADC Resolution	12 bit
Maximum Clock Frequency	50 MHz	Number of I/Os	120 I/O
Supply Voltage - Min	2.2 V	Supply Voltage - Max	3.6 V
Minimum Operating Temperature	- 40 C	Maximum Operating Temperature	+ 85 C
DAC Resolution	4 bit	Moisture Sensitive	Yes
Product	MCU	Product Type	32-bit Microcontrollers - MCU
Factory Pack Quantity	176	Subcategory	Microcontrollers - MCU
Tradename	MIPS32	Watchdog Timers	Watchdog Timer