Payment Method
OPA615ID
Wide Bandwidth, DC Restoration Circuit
-
Manufacturer:
-
Mfr.Part #:
OPA615ID
-
Datasheet:
-
Applications:
DC Restoration
-
Number of Circuits:
1
-
-3db Bandwidth:
710 MHz
-
Slew Rate:
2500V/µs
-
EDA/CAD Models:
Availability: 4904 PCS
Please fill in the short form below and we will provide you the quotation immediately.
OPA615ID General Description
The OPA615 is a complete subsystem for very fast and precise DC restoration, offset clamping, and low-frequency hum suppression of wideband amplifiers or buffers. Although it is designed to stabilize the performance of video signals, the circuit can also be used as a sample-and-hold amplifier, high-speed integrator, or peak detector for nanosecond pulses. The device features a wideband Operational Transconductance Amplifier (OTA) with a high-impedance cascode current source output and fast and precise sampling comparator that together set a new standard for high-speed applications. Both the OTA and the sampling comparator can be used as stand-alone circuits or combined to form a more complex signal processing stage. The self-biased, bipolar OTA can be viewed as an ideal voltage-controlled current source and is optimized for low input bias current. The sampling comparator has two identical high-impedance inputs and a current source output optimized for low output bias current and offset voltage; it can be controlled by a TTL-compatible switching stage within a few nanoseconds. The transconductance of the OTA and sampling comparator can be adjusted by an external resistor, allowing bandwidth, quiescent current, and gain trade-offs to be optimized.
The OPA615 is available in both an SO-14 surface-mount and an MSOP-10 package.
Key Features
- PROPAGATION DELAY: 1.9ns
- BANDWIDTH:
OTA: 710MHz
Comparator: 730MHz - LOW INPUT BIAS CURRENT: ±1µA
- SAMPLE-AND-HOLD SWITCHING TRANSIENTS: ±5mV
- SAMPLE-AND-HOLD FEEDTHROUGH REJECTION: 100dB
- CHARGE INJECTION: 40fC
- HOLD COMMAND DELAY TIME: 2.5ns
- TTL/CMOS HOLD CONTROL
- APPLICATIONS
- BROADCAST/HDTV EQUIPMENT
- TELECOMMUNICATIONS EQUIPMENT
- HIGH-SPEED DATA ACQUISITION
- CAD MONITORS/CCD IMAGE PROCESSING
- NANOSECOND PULSE INTEGRATOR/PEAK DETECTOR
- PULSE CODE MODULATOR/DEMODULATOR
- COMPLETE VIDEO DC LEVEL RESTORATION
- SAMPLE-AND-HOLD AMPLIFIER
- SHC615 UPGRADE
All trademarks are the property of their respective owners.
Specifications
Category | Integrated Circuits (ICs)LinearAmplifiersVideo Amps and Modules | Series | - |
Applications | DC Restoration | Output Type | - |
Number of Circuits | 1 | -3db Bandwidth | 710 MHz |
Slew Rate | 2500V/µs | Current - Supply | 13 mA |
Current - Output / Channel | 20 mA | Voltage - Supply, Single/Dual (±) | ±4V ~ 6.2V |
Mounting Type | Surface Mount | Base Product Number | OPA615 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 4904 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $11.423 | $11.42 |
10+ | $10.314 | $103.14 |
30+ | $9.911 | $297.33 |
100+ | $9.112 | $911.20 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for OPA615ID, guaranteed quotes back within 12hr.
Super alles oke. Note this: only battery gives circuit volts for working. So if you use solarpanel, a block-diode is impossible. At night it will drain your battery. With a blocking diode the circuit work.So it needs a steady 24/7 constant DC input. So it will work with a powersupply and your car or motorbattery in winter, to keep it full. Fast shipping, good quality.