Payment Method
OPA4314AQPWRQ1
General Purpose Amplifier 1 Circuit Rail-to-Rail 14-TSSOP
-
Manufacturer:
-
Mfr.Part #:
OPA4314AQPWRQ1
-
Datasheet:
-
Series:
Automotive, AEC-Q100
-
Amplifier Type:
General Purpose
-
Number of Circuits:
1
-
Output Type:
Rail-to-Rail
-
EDA/CAD Models:
Availability: 7473 PCS
Please fill in the short form below and we will provide you the quotation immediately.
OPA4314AQPWRQ1 General Description
The OPAx314-Q1 series is a family of single-, and dual-, and quad-channel operational amplifiers (op-amps) that represents a new generation of low-power, general-purpose CMOS amplifiers. Rail-to-rail input and output swings, low quiescent current (150 µA typically at 5 VS) combined with a wide bandwidth of 3 MHz, and very low noise (14 nV/√Hz at 1 kHz) make this device family very attractive for a variety of battery-powered applications that require a good balance between cost and performance. The low input bias current supports applications with mega-ohm source impedances.
The robust design of the OPAx314-Q1 series provides ease-of-use to the circuit designer: unity-gain stability with capacitive loads of up to 300 pF, an integrated RF/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostatic discharge (ESD) protection (4-kV HBM).
The device is optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V), and is specified over the full extended temperature range of –40°C to +125°C.
The single-channel device, OPA314-Q1, is offered in the SOT-23 package and the dual-channel device, OPA2314-Q1, is offered in the VSSOP (8) package. The quad-channel OPA4314-Q1 is available in the 14-pin TSSOP package.
Key Features
- Qualified for Automotive Applications
- AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade : –40°C to +125°C Ambient Operating Temperature Range
- Device HBM Classification Level 2
- Device CDM Classification Level C6
- Low IQ: 150 µA/ch
- Wide Supply Range: 1.8 V to 5.5 V
- Low Noise: 14 nV/√Hz at 1 kHz
- Gain Bandwidth: 3 MHz
- Low Input Bias Current: 0.2 pA
- Low Offset Voltage: 0.5 mV
- Unity-Gain Stable
- Internal RF/EMI Filter
- Specified Temperature Range: –40°C to +125°C
Specifications
Category | Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps | Series | Automotive, AEC-Q100 |
Amplifier Type | General Purpose | Number of Circuits | 1 |
Output Type | Rail-to-Rail | Slew Rate | 1.5V/µs |
Gain Bandwidth Product | 3 MHz | Current - Input Bias | 0.2 pA |
Voltage - Input Offset | 500 µV | Current - Supply | 150µA |
Current - Output / Channel | 20 mA | Voltage - Supply Span (Min) | 1.8 V |
Voltage - Supply Span (Max) | 5.5 V | Operating Temperature | -40°C ~ 125°C |
Mounting Type | Surface Mount | Base Product Number | OPA4314 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7473 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $3.680 | $3.68 |
200+ | $1.424 | $284.80 |
500+ | $1.374 | $687.00 |
1000+ | $1.350 | $1,350.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for OPA4314AQPWRQ1, guaranteed quotes back within 12hr.