Payment Method
OPA2727AIDR
e-trim™20MHz, High Precision CMOS Operational Amplifier
-
Manufacturer:
Texas Instruments
-
Mfr.Part #:
OPA2727AIDR
-
Datasheet:
-
Series:
OPA2727
-
Number of Channels:
2 Channel
-
GBP - Gain Bandwidth Product:
20 MHz
-
SR - Slew Rate:
30 V/us
-
EDA/CAD Models:
Availability: 8846 PCS
Please fill in the short form below and we will provide you the quotation immediately.
OPA2727AIDR General Description
The OPA727 and OPA728 series op amps use a state-of-the-art 12V analog CMOS process and e-trim, a package-level trim, offering outstanding dc precision and ac performance. The extremely low offset (150µV max) and drift (1.5µV/°C) are achieved by trimming the IC digitally after packaging to avoid the shift in parameters as a result of stresses during package assembly. To correct for offset drift, the OPA727 and OPA728 family is trimmed over temperature. The devices feature very high CMRR and open-loop gain to minimize errors.
Excellent ac characteristics, such as 20MHz GBW, 30V/µs slew rate and 0.0003% THD+N make the OPA727 and OPA728 well-suited for communication, high-end audio, and active filter applications. With a bias current of less than 500pA, they are well suited for use as transimpedance (I/V-conversion) amplifiers for monitoring optical power in ONET applications.
Optimized for single-supply operation up to 12V, the input common-mode range extends to GND for true single-supply functionality. The output swings to within 150mV of the rails, maximizing dynamic range. The low quiescent current of 4.3mA makes it well-suited for use in battery-operated equipment. The OPA728 shutdown version reduces the quiescent current to typically 6µA and features a reference pin for easy shutdown operation with standard CMOS logic in dual-supply applications.
For ease of use, the OPA727 and OPA728 op amp families are fully specified and tested over the supply range of 4V to 12V. The OPA727 (single) and OPA728 (single with shutdown) are available in MSOP-8 and DFN-8; the OPA2727 (dual) is available in DFN-8 and SO-8; and the quad version OPA4727 in TSSOP-14. All versions are specified for operation from -40°C to +125°C.
Key Features
- OFFSET: 15µV (typ), 150µV (max)
- DRIFT: 0.3µV/°C (typ), 1.5µV/°C (max)
- BANDWIDTH: 20MHz
- SLEW RATE: 30V/µs
- BIAS CURRENT: 500pA (max)
- LOW NOISE: 6nV/Hz at 100kHz
- THD+N: 0.0003% at 1kHz
- QUIESCENT CURRENT: 4.3mA/ch
- SUPPLY VOLTAGE: 4V to 12V
- SHUTDOWN MODE (OPA728): 6µA
- APPLICATIONS
- OPTICAL NETWORKING
- TRANSIMPEDANCE AMPLIFIERS
- INTEGRATORS
- ACTIVE FILTERS
- A/D CONVERTER DRIVERS
- I/V CONVERTER FOR DACs
- HIGH PERFORMANCE AUDIO
- PROCESS CONTROL
- TEST EQUIPMENT
e-trim is a trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
Specifications
Product Category | Precision Amplifiers | Series | OPA2727 |
Number of Channels | 2 Channel | GBP - Gain Bandwidth Product | 20 MHz |
SR - Slew Rate | 30 V/us | CMRR - Common Mode Rejection Ratio | 94 dB |
Output Current per Channel | 40 mA | Ib - Input Bias Current | 85 pA |
Vos - Input Offset Voltage | 15 uV | en - Input Voltage Noise Density | 6 nV/sqrt Hz |
Supply Voltage - Max | 12 V | Supply Voltage - Min | 3.5 V |
Operating Supply Current | 4.3 mA | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Shutdown | No Shutdown |
Mounting Style | SMD/SMT | Amplifier Type | Low Offset Amplifier |
Dual Supply Voltage | +/- 3 V, +/- 5 V | Features | Shutdown, Small Size |
Height | 1.58 mm | In - Input Noise Current Density | 0.0025 pA/sqrt Hz |
Input Type | Rail-to-Rail | Length | 4.9 mm |
Maximum Dual Supply Voltage | +/- 6 V | Minimum Dual Supply Voltage | +/- 2 V |
Moisture Sensitive | Yes | Operating Supply Voltage | 4 V to 12 V, +/- 2 V to +/- 6 V |
Output Type | Rail-to-Rail | Product | Precision Amplifiers |
Product Type | Precision Amplifiers | PSRR - Power Supply Rejection Ratio | 90.46 dB |
Factory Pack Quantity | 2500 | Subcategory | Amplifier ICs |
Supply Type | Single, Dual | Technology | CMOS |
Voltage Gain dB | 120 dB | Width | 3.91 mm |
Unit Weight | 0.002677 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 8846 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for OPA2727AIDR, guaranteed quotes back within 12hr.