This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

OPA2607QDGKRQ1

Automotive, dual-channel, 50-MHz decompensated rail-to-rail output CMOS op amp

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

OPA2607QDGKRQ1
Datasheet:

OPA2607QDGKRQ1 Datasheet (PDF)
Amplifier Type:

CMOS
Number of Circuits:

2
Output Type:

Rail-to-Rail
Slew Rate:

24V/µs
EDA/CAD Models:

Request Free CAD Models for OPA2607QDGKRQ1

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

OPA2607QDGKRQ1 General Description

The OPA607-Q1 and OPA2607-Q1 devices are decompensated, minimum gain of 6 V/V stable, general-purpose CMOS operational amplifiers with low noise of 3.8 nV/√ Hz and a GBW of 50 MHz. The low voltage offset drift (dVOS/dT) and wide bandwidth of the OPAx607-Q1 devices make them attractive for low cost general-purpose applications like low side current sensing and TIA (transipedance amplifier). The high-impedance CMOS inputs make the OPAx607-Q1 devices ideal amplifiers to interface with sensors with high output impedance (for example, piezoelectric transducers).

The rail-to-rail output (RRO) of the OPAx607-Q1 devices can swing up to 8 mV from the supply rails, maximizing dynamic range.

The OPAx607-Q1 is optimized for low supply voltage operation as low as 2.2 V (±1.1 V) and up to 5.5 V (±2.75 V), and is specified over the temperature range of –40°C to +125°C.

Key Features

Qualified for automotive applications
AEC-Q100 qualified with the following results:
- Temperature grade 1: –40°C to +125°C, TA
Gain bandwidth product (GBW): 50 MHz
Quiescent current: 900 µA (typical)
Input offset drift: 1.5 µV/°C (maximum)
Offset voltage: 120 µV (typical)
Input bias current: 10 pA (maximum)
Rail-to-rail output (RRO)
Supply range : 2.2 V to 5.5 V

Specifications

Category	Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps	Series	-
Amplifier Type	CMOS	Number of Circuits	2
Output Type	Rail-to-Rail	Slew Rate	24V/µs
Gain Bandwidth Product	50 MHz	Current - Input Bias	3 pA
Voltage - Input Offset	100 µV	Current - Supply	900µA
Current - Output / Channel	60 mA	Voltage - Supply Span (Min)	2.2 V
Voltage - Supply Span (Max)	5.5 V	Operating Temperature	-40°C ~ 125°C (TA)
Mounting Type	Surface Mount