This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

OP97FP

Operational Amplifier, 1 Func, 200uV Offset-Max, BIPolar, PDIP8

Manufacturer:

ADI
Mfr.Part #:

OP97FP
Datasheet:

OP97FP Datasheet (PDF)
Amplifier Type:

General Purpose
Number of Circuits:

1
Slew Rate:

0.2V/µs
-3db Bandwidth:

900 kHz
EDA/CAD Models:

Request Free CAD Models for OP97FP

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

OP97FP General Description

The OP-97 is a low-power alternative to the industry-standard OP-07 precision amplifier. The OP-97 maintains the standards of performance set by the OP-07 while utilizing only 600µA supply current, less than 1/6 that of an OP-07. Offset voltage is an ultra-low 25µV, and drift over temperature is below 0.6µV/°C. External offset trimming is not required in the majority of circuits. Improvements have been made over OP-07 specifications in several areas. Notable is bias current, which remains below 250pA over the full military temperature range. The OP-97 is ideal for use in precision long-term integrators or sample-and-hold circuits that must operate at elevated temperatures. Common-mode rejection and power-supply rejection are also improved with the OP-97, at 114dB minimum over wider ranges of common-mode or supply voltage. Outstanding PSR, a supply range specified from ±2.25V to ±20V and the OP-97's minimal power requirements combine to make the OP-97 a preferred device for portable and battery-powered instruments. The OP-97 conforms to the OP-07 pinout, with the null potentimeter connected between pins 1 and 8 with the wiper to V+. The OP-97 will upgrade circuit designs using 725, OP05, OP07, OP12, and 1012 type amplifiers. It may replace 741-type amplifiers in circuits without nullling or where the nulling circuitry has been removed.

Key Features

Low supply current: 600 μA maximum
OP07 type performance
Offset voltage: 20 μV maximum
Offset voltage drift: 0.6 μV/°C maximum
Very low bias current
25°C: 100 pA maximum
−55°C to +125°C: 250 pA maximum
High common-mode rejection: 114 dB minimum
Extended industrial temperature range: −40°C to +85°C

Specifications

Amplifier Type	General Purpose	Number of Circuits	1
Output Type	-	Slew Rate	0.2V/µs
Gain Bandwidth Product	-	-3db Bandwidth	900 kHz
Current - Input Bias	30 pA	Voltage - Input Offset	30 µV
Current - Supply	380µA	Current - Output / Channel	-
Voltage - Supply Span (Min)	4 V	Voltage - Supply Span (Max)	40 V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Through Hole