This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ONET8501PBRGTR

11.3-Gbps rate-selectable limiting amplifier

Manufacturer:

Texas Instruments, Inc
Mfr.Part #:

ONET8501PBRGTR
Datasheet:

ONET8501PBRGTR Datasheet (PDF)
Type:

Limiting amplifier
Data rate (max) (MBps):

11300
Features:

Bandwidth select
Supply current (typ) (µA):

50000
EDA/CAD Models:

Request Free CAD Models for ONET8501PBRGTR

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ONET8501PBRGTR General Description

The ONET8501PB device is a high-speed, 3.3-V limiting amplifier for multiple fiber optic and copper cable applications with data rates from 2 Gbps up to 11.3 Gbps.

The device provides a two-wire serial interface which allows digital control of the bandwidth, output amplitude, output preemphasis, input threshold voltage (slice level), and the loss of signal assert level. Predetermined settings for bandwidth and LOS assert levels can also be selected with external rate selection pins.

The ONET8501PB provides a gain of about 34 dB which ensures a fully differential output swing for input signals as low as 20 mV_pp. The output amplitude can be adjusted to 350 mV_pp, 650 mV_pp, or 850 mV_pp. To compensate for frequency-dependent loss of microstrips or striplines connected to the output of the device, programmable preemphasis is included in the output stage. A settable loss of signal detection and output disable are also provided.

The device, available in RoHS compliant small footprint 3-mm × 3-mm, 16-pin VQFN package, typically dissipates less than 170 mW and is characterized for operation from &3150;40°C to 100°C.

Key Features

Up to 11.3-Gbps Operation
2-Wire Digital Interface
Digitally Selectable Input Bandwidth
Adjustable LOS Threshold
Digitally Selectable Output Voltage
Digitally Selectable Output Preemphasis
Adjustable Input Threshold Voltage
Low Power Consumption
Input Offset Cancellation
CML Data Outputs With On-Chip 50-Ω Back-
Termination to VCC
Single 3.3-V Supply
Output Disable
Surface Mount Small Footprint 3-mm × 3-mm,
16-Pin, RoHS compliant VQFN Package

Specifications

Type	Limiting amplifier	Data rate (max) (MBps)	11300
Features	Bandwidth select	Supply current (typ) (µA)	50000
Supply current (max) (µA)	63000	Deterministic jitter (typ) (ps)	3
Operating temperature range (°C)	-40 to 100	feature-type	Limiting Amplifier
feature-number-of-elements-per-chip	1	feature-number-of-channels-per-chip	1
feature-rail-to-rail		feature-typical-gain-bandwidth-product-mhz
feature-maximum-voltage-gain-db	34(Typ)	feature-minimum-cmrr-db
feature-minimum-psrr-db		feature-output-type
feature-maximum-input-offset-voltage-mv		feature-maximum-input-bias-current-ua
feature-maximum-input-resistance-mohm	0.0001(Typ)@3.3V	feature-maximum-power-dissipation-mw
feature-packaging	Tape and Reel	feature-rad-hard
feature-pin-count	16	feature-cecc-qualified	No
feature-esd-protection		feature-escc-qualified
feature-military	No	feature-aec-qualified	No
feature-aec-qualified-number		feature-eccn-code	5A991B1
feature-svhc	No	feature-svhc-exceeds-threshold	No