This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

NCS20074DR2G

Operational Amplifier, Wide supply range, 3 MHz CMOS Op-Amp

Manufacturer:

ON Semiconductor, LLC
Mfr.Part #:

NCS20074DR2G
Datasheet:

NCS20074DR2G Datasheet (PDF)
Case Outline:

948G-01
MSL Temp (°C):

260
Container Type:

REEL
Mounting Style:

SMD/SMT
EDA/CAD Models:

Request Free CAD Models for NCS20074DR2G

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

NCS20074DR2G General Description

The NCS2007x series operational amplifiers provide rail−to−rail output operation, 3 MHz bandwidth, and are available in single, dual, and quad configurations. Rail−to−rail operation enables the user to make optimal use of the entire supply voltage range. The NCS2007x can operate on supply voltages as low as 2.7 V up to 36V over the temperature range of −40°C to 125°C. At a 2.7 V supply, the high bandwidth provides a slew rate of 2.8 V/µs while only consuming 405 µA of quiescent current per channel. The wide supply range allows the NCS2007x to run on supply voltages as high as 36 V, making it ideal for a broad range of applications. Since this is a CMOS device, high input impedance and low bias currents make it ideal for interfacing to a wide variety of signal sensors. The NCS2007x devices are available in a variety of compact packages.

Product Family:
NCS20071 NCS20072 NCS20074 Channel 1 2 4 Packages SOT553, SOT23-5 SOIC-8, Micro-8, TSSOP-8 TSSOP-14, SOIC-14

Key Features

Rail−To−Rail Output
Wide Supply Range: 2.7 V to 36 V
Wide Bandwidth: 3 MHz typical at V_S = 2.7 V
High Slew Rate: 2.8 V/µs typical at V_S = 2.7 V
Low Supply Current: 405 µA per channel at V_S = 2.7 V
Low Input Bias Current: 5 pA typical
Wide Temperature Range: −40°C to 125°C
Available in a variety of packages
NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable

Application

Economical low side current sensing solution
Sensor signal conditioning including high impedance sensors
Rail to Rail output swing applications
Active Filters

Specifications

Status	Active	Case Outline	948G-01
MSL Temp (°C)	260	Container Type	REEL
Product Category	Operational Amplifiers - Op Amps	Mounting Style	SMD/SMT
Number of Channels	4 Channel	Supply Voltage - Max	36 V, +/- 18 V
GBP - Gain Bandwidth Product	3 MHz	Output Current per Channel	65 mA
SR - Slew Rate	2.4 V/us	Vos - Input Offset Voltage	1.3 mV
Supply Voltage - Min	2.7 V, +/- 1.35 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C	Ib - Input Bias Current	1.5 nA
Operating Supply Current	465 uA	Shutdown	No Shutdown
CMRR - Common Mode Rejection Ratio	145 dB	en - Input Voltage Noise Density	30 nV/sqrt Hz
Series	NCV20071	3 dB Bandwidth	-
Amplifier Type	General Purpose Amplifier	In - Input Noise Current Density	90 fA/sqrt Hz
Ios - Input Offset Current	200 pA	Maximum Dual Supply Voltage	+/- 18 V
Minimum Dual Supply Voltage	+/- 1.35 V	Operating Supply Voltage	2.7 V to 36 V
Output Type	Rail-to-Rail	Product	Operational Amplifiers
Product Type	Op Amps - Operational Amplifiers	PSRR - Power Supply Rejection Ratio	135 dB
Factory Pack Quantity	2500	Subcategory	Amplifier ICs
THD plus Noise	0.001 %	Unit Weight	0.011923 oz