This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

MSP430F1611IRTDT

MSP430 CPU16 MSP430x1xx Microcontroller IC 16-Bit 8MHz 48KB (48K x 8 + 256B) FLASH 64-VQFN (9x9)

Manufacturer:

TEXAS INSTRUMENTS INC
Mfr.Part #:

MSP430F1611IRTDT
Datasheet:

MSP430F1611IRTDT Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

64
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for MSP430F1611IRTDT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

MSP430F1611IRTDT General Description

The Texas Instruments MSP430 family of ultralow power microcontrollers consist of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 6 µs.

The MSP430F15x/16x/161x series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit A/D converter, dual 12-bit D/A converter, one or two universal serial synchronous/asynchronous communication interfaces (USART), I2C, DMA, and 48 I/O pins. In addition, the MSP430F161x series offers extended RAM addressing for memory-intensive applications and large C-stack requirements.

Typical applications include sensor systems, industrial control applications, hand-held meters, etc.

Key Features

Low Supply-Voltage Range: 1.8 V to 3.6 V
Ultralow Power Consumption
- Active Mode: 330 µA at 1 MHz, 2.2 V
- Standby Mode: 1.1 µA
- Off Mode (RAM Retention): 0.2 µA
Five Power-Saving Modes
Wake-Up From Standby Mode in Less Than 6 µs
16-Bit RISC Architecture,
125-ns Instruction Cycle Time
Three-Channel Internal DMA
12-Bit Analog-to-Digital (A/D) Converter
With Internal Reference, Sample-and-Hold,
and Autoscan Feature
Dual 12-Bit Digital-to-Analog (D/A)
Converters With Synchronization
16-Bit Timer_A With Three
Capture/Compare Registers
16-Bit Timer_B With Three or Seven
Capture/Compare-With-Shadow Registers
On-Chip Comparator
Serial Communication Interface (USART0),
Functions as Asynchronous UART or
Synchronous SPI or I²C™ Interface
Serial Communication Interface (USART1),
Functions as Asynchronous UART or
Synchronous SPI Interface
Supply Voltage Supervisor/Monitor With
Programmable Level Detection
Brownout Detector
Bootstrap Loader
Serial Onboard Programming, No External
Programming Voltage Needed, Programmable
Code Protection by Security Fuse
Family Members Include
- MSP430F155
  16KB+256B Flash Memory
  512B RAM
- MSP430F156
  24KB+256B Flash Memory
  1KB RAM
- MSP430F157
  32KB+256B Flash Memory,
  1KB RAM
- MSP430F167
  32KB+256B Flash Memory,
  1KB RAM
- MSP430F168
  48KB+256B Flash Memory,
  2KB RAM
- MSP430F169
  60KB+256B Flash Memory,
  2KB RAM
- MSP430F1610
  32KB+256B Flash Memory
  5KB RAM
- MSP430F1611
  48KB+256B Flash Memory
  10KB RAM
- MSP430F1612
  55KB+256B Flash Memory
  5KB RAM
Available in 64-Pin QFP Package (PM) and
64-Pin QFN Package (RTD)
For Complete Module Descriptions, See the
MSP430x1xx Family User’s Guide,
Literature Number SLAU049

I²C is a registered trademark of Philips Incorporated.

Application

Test & Measurement
Portable Devices
Automation & Process Control
Metering
Industrial

Specifications

Source Content uid	MSP430F1611IRTDT	Pbfree Code	Yes
Part Life Cycle Code	Active	Pin Count	64
Reach Compliance Code	compliant	ECCN Code	EAR99
HTS Code	8542.31.00.01	Has ADC	YES
Address Bus Width		Bit Size	16
Boundary Scan	YES	CPU Family	MSP430
Clock Frequency-Max	8 MHz	DAC Channels	YES
DMA Channels	YES	External Data Bus Width
Format	FIXED POINT	Integrated Cache	NO
JESD-30 Code	S-PQCC-N64	JESD-609 Code	e3
Length	9 mm	Low Power Mode	YES
Moisture Sensitivity Level	3	Number of DMA Channels	3
Number of External Interrupts		Number of I/O Lines	48
Number of Serial I/Os	2	Number of Terminals	64
Number of Timers	6	On Chip Data RAM Width	8
On Chip Program ROM Width	8	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	PWM Channels	YES
Peak Reflow Temperature (Cel)	260	Power Supplies	2/3.3 V
Qualification Status	Not Qualified	RAM (bytes)	10240
RAM (words)	10	ROM (words)	49408
ROM Programmability	FLASH	Seated Height-Max	0.9 mm
Speed	8 MHz	Supply Current-Max	0.6 mA
Supply Voltage-Max	3.6 V	Supply Voltage-Min	1.8 V
Supply Voltage-Nom	2.2 V	Surface Mount	YES
Technology	CMOS	Temperature Grade	INDUSTRIAL
Terminal Finish	Matte Tin (Sn)	Terminal Form	NO LEAD
Terminal Pitch	0.5 mm	Terminal Position	QUAD
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED	Width	9 mm
uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC