This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

EPCQ16ASI8N

FPGA - Configuration Memory

Manufacturer:

ALTERA
Mfr.Part #:

EPCQ16ASI8N
Datasheet:

EPCQ16ASI8N Datasheet (PDF)
Memory Type:

Flash
Memory Size:

16 Mbit
Maximum Operating Frequency:

100 MHz
Operating Supply Voltage:

3.3 V
EDA/CAD Models:

Request Free CAD Models for EPCQ16ASI8N

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

EPCQ16ASI8N General Description

Intel Serial or quad-serial FPGA configuration in devices that support active serial (AS) x1 or AS x41 configuration schemes. Reprogrammable memory more than 100,000 program-erase cycles. Write protection support for memory sectors using status register bits. Fast read, extended dual input fast read, and extended quad input fast read of the entire memory using a single operation code. Reprogrammable with an external microprocessor using the SRunner software driver. In-system programming (ISP) support with the SRunner software driver. ISP support with Intel® FPGA Download Cable II, Intel® FPGA Download Cable, or Intel® FPGA Ethernet Cable. By default, the memory array is erased and the bits are set to 1.

The EPCQ4A, EPCQ16A, and EPCQ32A devices are available in 8-pin SOIC packages.The EPCQ64A and EPCQ128A devices are available in 16-pin SOIC packages.

EPCQ-A devices support active and standby power modes. When the nCS signal is low,the device is enabled and is in active power mode. The FPGA is configured while theEPCQ-A device is in active power mode. When the nCS signal is high, the device isdisabled but remains in active power mode until all internal cycles are completed, suchas write or erase operations. The EPCQ-A device then goes into standby power mode.The ICC1 and ICC0 parameters list the VCC supply current when the device is in activeand standby power modes.

Key Features

EPCQ-A devices offer the following features:

Specifications

Product Category	FPGA - Configuration Memory	Memory Type	Flash
Memory Size	16 Mbit	Maximum Operating Frequency	100 MHz
Operating Supply Voltage	3.3 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Mounting Style	SMD/SMT
Moisture Sensitive	Yes	Operating Supply Current	100 A
Product Type	FPGA - Configuration Memory	Series	EPCQ
Factory Pack Quantity	100	Subcategory	Programmable Logic ICs
Supply Voltage - Max	3.6 V	Supply Voltage - Min	2.7 V
Tradename	Enpirion	Part # Aliases	974763
Unit Weight	0.001764 oz