Payment Method
MAX9850ETI-T
Stereo Audio DAC 28-Pin TQFN EP T/R
-
Manufacturer:
-
Mfr.Part #:
MAX9850ETI-T
-
Datasheet:
-
Series:
DirectDrive®
-
Type:
Class AB
-
Output Type:
Headphones, 2-Channel (Stereo)
-
Max Output Power x Channels @ Load:
95mW x 2 @ 16Ohm
-
EDA/CAD Models:
Availability: 6642 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MAX9850ETI-T General Description
The MAX985/MAX986/MAX989/MAX990/MAX993/MAX994 single/dual/quad micropower comparators feature low-voltage operation and rail-to-rail inputs and outputs. Their operating voltages range from 2.5V to 5.5V, making them ideal for both 3V and 5V systems. These comparators also operate with ±1.25V to ±2.75V dual supplies. They consume only 11μA of supply current while achieving a 300ns propagation delay. Input bias current is typically 1.0pA, and input offset voltage is typically 0.5mV. Internal hysteresis ensures clean output switching, even with slow-moving input signals. The output stage's unique design limits supply-current surges while switching, virtually eliminating the supply glitches typical of many other comparators. The MAX985/MAX989/MAX993 have a push-pull output stage that sinks as well as sources current. Large internal output drivers allow rail-to-rail output swing with loads up to 8mA. The MAX986/MAX990/MAX994 have an open-drain output stage that can be pulled beyond VCC to 6V (max) above VEE. These open-drain versions are ideal for level translators and bipolar to single-ended converters. The single MAX985 is available in a chip-scale package (UCSP), significantly reducing the required PC board area. The single MAX985/MAX986 are available in 5-pin SC70 packages and the dual MAX989/MAX990 are available in 8-pin SOT23 packages.
Key Features
- 11μA Quiescent Supply Current
- 2.5V to 5.5V Single-Supply Operation
- Common-Mode Input Voltage Range Extends 250mV Beyond the Rails
- 300ns Propagation Delay
- Push-Pull Output Stage Sinks and Sources 8mA Current (MAX985/MAX989/MAX993)
- Open-Drain Output Voltage Extends Beyond V
- CC
- Unique Output Stage Reduces Output Switching Current, Minimizing Overall Power Consumption
- 80μA Supply Current at 1MHz Switching Frequency
- No Phase Reversal for Overdriven Inputs
- Available in Space-Saving Packages:
- UCSP (MAX985)
- SOT23 (MAX985/MAX986/MAX989/MAX990)
- μMAX? (MAX989/MAX990)
Application
- Digital-Line Receivers
- Ground/Supply Sensing
- IR Receivers
- Level Translators
- Mobile Communications
- Portable Battery-Powered Systems
- Threshold Detectors
- Window Comparators
- Zero-Crossing Detectors
Specifications
Category | Integrated Circuits (ICs)LinearAmplifiersAudio Amplifiers | Series | DirectDrive® |
Type | Class AB | Output Type | Headphones, 2-Channel (Stereo) |
Max Output Power x Channels @ Load | 95mW x 2 @ 16Ohm | Voltage - Supply | 1.8V ~ 3.6V |
Features | DAC, Depop, Digital Inputs, I²C, I²S, Line Level Inputs and Outputs, Mute, Shutdown, Volume Control | Mounting Type | Surface Mount |
Operating Temperature | -40°C ~ 85°C (TA) | Base Product Number | MAX9850 |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 6642 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MAX9850ETI-T, guaranteed quotes back within 12hr.