Payment Method
MAX3468ESA+T
1/1 Transceiver Half RS422, RS485 8-SOIC
-
Manufacturer:
Analog Devices Inc.
-
Mfr.Part #:
MAX3468ESA+T
-
Datasheet:
-
Series:
MAX3468
-
Mounting Style:
SMD/SMT
-
Function:
Transceiver
-
Number of Drivers:
1 Driver
-
EDA/CAD Models:
Availability: 7072 PCS
Please fill in the short form below and we will provide you the quotation immediately.
MAX3468ESA+T General Description
The MAX3465-MAX3469 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver complies with the PROFIBUS specification providing +2.1V minimum output level with a 54Ω load, 40Mbps data rate, and output skew less than 2ns. Each part contains one three-state differential line driver and one differential input line receiver. The devices operate from a +5V supply and feature true fail-safe circuitry, which guarantees a logic-high receiver output when the receiver inputs are open or shorted. This enables all receiver outputs on a terminated bus to output logic highs when all transmitters are disabled.
Key Features
- Recommended for PROFIBUS Applications
- Up to 40Mbps Data Rate
- 15ns Transmitter Propagation Delay
- 20ns Receiver Propagation Delay
- 2ns Transmitter and Receiver Skew
- High Differential Driver Output Level (2.1V on 54Ω)
- Hot-Swap Versions
- 1µA Shutdown Supply Current
- Low Supply Current Requirements (2.5mA, typ)
- Allow Up to 128 Transceivers on the Bus
- True Fail-Safe Receiver while Maintaining EIA/TIA-485 Compatibility
- Designed for Multipoint Transmissions on Long or Noisy Bus Lines
- Full-Duplex and Half-Duplex Versions Available
- Phase Controls to Correct for Twisted-Pair Reversal for 14-Pin Versions
- Current-Limiting and Thermal Shutdown for Driver Overload Protection
Application
- High-Speed RS-422 Communications
- High-Speed RS-485 Communications
- Industrial-Control Local Area Networks
- Level Translators
- PROFIBUS Applications
Specifications
Product Category | RS-422/RS-485 Interface IC | Series | MAX3468 |
Mounting Style | SMD/SMT | Function | Transceiver |
Number of Drivers | 1 Driver | Number of Receivers | 1 Receiver |
Data Rate | 40 Mb/s | Supply Voltage - Max | 5 V |
Supply Voltage - Min | 5 V | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Height | 1.5 mm (Max) |
Input Voltage | 800 mV to 2 V | Length | 5 mm (Max) |
Operating Supply Current | 2.5 mA | Operating Supply Voltage | 5 V |
Output Current | 125 uA | Output Voltage | 3 V |
Pd - Power Dissipation | 471 mW | Product Type | RS-422/RS-485 Interface IC |
Propagation Delay Time | 15 ns, 20 ns | Factory Pack Quantity | 2500 |
Subcategory | Interface ICs | Width | 4 mm (Max) |
Part # Aliases | MAX3468 | Unit Weight | 0.005044 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7072 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | $3.428 | $3.43 |
200+ | $1.327 | $265.40 |
500+ | $1.280 | $640.00 |
1000+ | $1.256 | $1,256.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for MAX3468ESA+T, guaranteed quotes back within 12hr.
Top Sellers
-
FT2232H
FTDI
High Speed USB to UART/MPSSE USB 2.0 1.8V/3.3V 64-Pin QFN EP
-
FT4232H
Ir
USB Hi-Speed FT4232H Hub Module
-
FT2232HL
Ftdi Chip
Dual High Speed USB UART/FIFO IC, LQFP64 FTDI Chip FT2232HL Dual UART Interface RS232, RS422, RS485 480Mbit/s, 64-Pin, LQFP
-
FT4232HL
Ftdi Chip
USB Hi-Speed to Quad Channel Serial UART/JTAG/SPI/I2C IC - LQFP-64
-
ASM3142
ASMedia
USB3.2 Gen2x1 Host Interface