This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LMP7704MT/NOPB

Precision, CMOS Input, RRIO, Wide Supply Range Quad Amplifier

Manufacturer:

TI
Mfr.Part #:

LMP7704MT/NOPB
Datasheet:

LMP7704MT/NOPB Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Pin Count:

14
Reach Compliance Code:

compliant
EDA/CAD Models:

Request Free CAD Models for LMP7704MT/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LMP7704MT/NOPB General Description

The LMP770x are single, dual, and quad low-offset voltage, rail-to-rail input and output precision amplifiers, each with a CMOS input stage and a wide supply voltage range. The LMP770x are part of the LMP™ precision amplifier family and are ideal for sensor interface and other instrumentation applications.

The specified low-offset voltage of less than ±200 µV, along with the specified low input bias current of less than ±1 pA, make the LMP7701 ideal for precision applications. The LMP770x are built using VIP50 technology, which allows the combination of a CMOS input stage and a 12-V common-mode and supply voltage range. This makes the LMP770x ideal for applications where conventional CMOS parts cannot operate under the desired voltage conditions.

The LMP770x each have a rail-to-rail input stage that significantly reduces the CMRR glitch commonly associated with rail-to-rail input amplifiers. This is achieved by trimming both sides of the complimentary input stage, thereby reducing the difference between the NMOS and PMOS offsets. The output of the LMP770x swings within 40 mV of either rail to maximize the signal dynamic range in applications requiring low supply voltage.

The LMP7701 is offered in the space-saving 5-Pin SOT-23 and 8-Pin SOIC package. The LMP7702 is offered in the 8-Pin SOIC and 8-Pin VSSOP package. The quad LMP7704 is offered in the 14-Pin SOIC and 14-Pin TSSOP package. These small packages are ideal solutions for area constrained PC boards and portable electronics.

Key Features

Unless Otherwise Noted,
Typical Values at V_S = 5 V
Input Offset Voltage (LMP7701): ±200-µV
(Maximum)
Input Offset Voltage (LMP7702/LMP7704):
±220-µV (Maximum)
Input Bias Current: ±200 fA
Input Bias Current: ±200 fA
Input Voltage Noise: 9 nV/√Hz
CMRR: 130 dB
Open-Loop Gain: 130 dB
Temperature Range: –40°C to 125°C
Unity-Gain Bandwidth: 2.5 MHz
Supply Current (LMP7701): 715 µA
Supply Current (LMP7702): 1.5 mA
Supply Current (LMP7704): 2.9 mA
Supply Voltage Range: 2.7 V to 12 V
Rail-to-Rail Input and Output

Specifications

Source Content uid	LMP7704MT/NOPB	Pbfree Code	Yes
Part Life Cycle Code	Active	Pin Count	14
Reach Compliance Code	compliant	ECCN Code	EAR99
HTS Code	8542.33.00.01	Amplifier Type	OPERATIONAL AMPLIFIER
Frequency Compensation	YES	JESD-30 Code	R-PDSO-G14
Low-Bias	YES	Low-Offset	YES
Micropower	NO	Moisture Sensitivity Level	1
Number of Functions	4	Number of Terminals	14
Packing Method	TUBE	Peak Reflow Temperature (Cel)	260
Power	NO	Programmable Power	NO
Surface Mount	YES	Technology	CMOS
Temperature Grade	AUTOMOTIVE	Terminal Finish	MATTE TIN
Terminal Form	GULL WING	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30	Voltage Gain-Min	50100
Wideband	NO