Payment Method
![hsbc](/img/service-policies-hsbc.png)
![paypal](/img/service-policies-paypal.png)
![wu](/img/service-policies-wu.png)
![mg](/img/service-policies-mg.png)
Quad Channel, Wideband Video Amplifier
Manufacturer: Texas Instruments, Inc
Mfr.Part #: LMH6722MTX/NOPB
Datasheet:
LMH6722MTX/NOPB Datasheet (PDF)
genericPartNumber: LMH6722
partDescription: Quad Channel, Wideband Video Amplifier
Mounting Style: SMD/SMT
Output Current per Channel: 70 mA
EDA/CAD Models:
Request Free CAD Models for LMH6722MTX/NOPB
Please fill in the short form below and we will provide you the quotation immediately.
The LMH6714/LMH6720/LMH6722 series combine Texas Instruments' VIP10 high speed complementary bipolar process with Texas Instruments' current feedback topology to produce a very high speed op amp. These amplifiers provide a 400MHz small signal bandwidth at a gain of +2V/V and a 1800V/μs slew rate while consuming only 5.6mA from ±5V supplies.
The LMH6714/LMH6720/LMH6722 series offer exceptional video performance with its 0.01% and 0.01° differential gain and phase errors for NTSC and PAL video signals while driving a back terminated 75Ω load. They also offer a flat gain response of 0.1dB to 120MHz. Additionally, they can deliver 70mA continuous output current. This level of performance makes them an ideal op amp for broadcast quality video systems.
The LMH6714/LMH6720/LMH6722's small packages (SOIC, SOT-23 and WSON), low power requirement, low noise and distortion allow the LMH6714/LMH6720/LMH6722 to serve portable RF applications. The high impedance state during shutdown makes the LMH6720 suitable for use in multiplexing multiple high speed signals onto a shared transmission line. The LMH6720 is also ideal for portable applications where current draw can be reduced with the shutdown function.
All trademarks are the property of their respective owners.
genericPartNumber | LMH6722 | orderablePartNumber | LMH6722MTX/NOPB |
partDescription | Quad Channel, Wideband Video Amplifier | statusDisplay | ACTIVE |
statusDescription | This product has been released to the market and is available for purchase. For some products, newer alternatives may be available. | Product Category | Operational Amplifiers - Op Amps |
Mounting Style | SMD/SMT | Output Current per Channel | 70 mA |
Vos - Input Offset Voltage | 8 mV | Minimum Operating Temperature | - 40 C |
Maximum Operating Temperature | + 85 C | Ib - Input Bias Current | 20 uA |
Operating Supply Current | 22.5 mA | CMRR - Common Mode Rejection Ratio | 54 dB |
Series | LMH6722 | Dual Supply Voltage | +/- 5 V |
Height | 0.9 mm | In - Input Noise Current Density | 1.2 pA/sqrt Hz |
Length | 5 mm | Maximum Dual Supply Voltage | +/- 6.25 V |
Minimum Dual Supply Voltage | +/- 4 V | Operating Supply Voltage | 9 V, 12 V |
Product | Operational Amplifiers | Product Type | Op Amps - Operational Amplifiers |
PSRR - Power Supply Rejection Ratio | 48 dB | Factory Pack Quantity | 2500 |
Subcategory | Amplifier ICs | Supply Type | Single, Dual |
Technology | BiCOM | Width | 4.4 mm |
Unit Weight | 0.002018 oz |
After-Sales & Settlement Related
Payment Method
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $12.504 | $12.50 |
200+ | $4.839 | $967.80 |
500+ | $4.669 | $2,334.50 |
1000+ | $4.585 | $4,585.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to
[email protected], or fill below form to Quote for LMH6722MTX/NOPB, guaranteed quotes back within
12hr.