This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LMH6618MK/NOPB

Single 130 MHz, 1.25 mA RRIO Operational Amplifiers

Manufacturer:

Texas Instruments
Mfr.Part #:

LMH6618MK/NOPB
Datasheet:

LMH6618MK/NOPB Datasheet (PDF)
Mounting Style:

SMD/SMT
Number of Channels:

1 Channel
Supply Voltage - Max:

11 V
GBP - Gain Bandwidth Product:

71 MHz

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LMH6618MK/NOPB General Description

The LMH6618 (single, with shutdown) and LMH6619 (dual) are 130 MHz rail-to-rail input and output amplifiers designed for ease of use in a wide range of applications requiring high speed, low supply current, low noise, and the ability to drive complex ADC and video loads. The operating voltage range extends from 2.7V to 11V and the supply current is typically 1.25 mA per channel at 5V. The LMH6618 and LMH6619 are members of the PowerWise family and have an exceptional power-to-performance ratio.

The amplifier’s voltage feedback design topology provides balanced inputs and high open loop gain for ease of use and accuracy in applications such as active filter design. Offset voltage is typically 0.1 mV and settling time to 0.01% is 120 ns which combined with an 100 dBc SFDR at 100 kHz makes the part suitable for use as an input buffer for popular 8-bit, 10-bit, 12-bit and 14-bit mega-sample ADCs.

The input common mode range extends 200 mV beyond the supply rails. On a single 5V supply with a ground terminated 150Ω load the output swings to within 37 mV of the ground rail, while a mid-rail terminated 1 kΩ load will swing to 77 mV of either rail, providing true single supply operation and maximum signal dynamic range on low power rails. The amplifier output will source and sink 35 mA and drive up to 30 pF loads without the need for external compensation.

The LMH6618 has an active low disable pin which reduces the supply current to 72 µA and is offered in the space saving 6-Pin SOT package. The LMH6619 is offered in the 8-Pin SOIC package. The LMH6618 and LMH6619 are available with a −40°C to +125°C extended industrial temperature grade.

Key Features

V_S = 5V, R_L = 1 kΩ, T_A = 25°C and
A_V = +1, Unless Otherwise Specified.
Operating Voltage Range 2.7V to 11V
Supply Current per Channel 1.25 mA
Small Signal Bandwidth 130 MHz
Input Offset Voltage (Limit at 25°C) ±0.75 mV
Slew Rate 55 V/µs
Settling Time to 0.1% 90 ns
Settling Time to 0.01% 120 ns
SFDR (f = 100 kHz, A_V = +1, V_OUT = 2 V_PP) 100 dBc
0.1 dB Bandwidth (A_V = +2) 15 MHz
Low Voltage Noise 10 nV/√Hz
Industrial Temperature Grade −40°C to +125°C
Rail-to-Rail Input and Output

Specifications

Product Category	Operational Amplifiers - Op Amps	Mounting Style	SMD/SMT
Number of Channels	1 Channel	Supply Voltage - Max	11 V
GBP - Gain Bandwidth Product	71 MHz	Output Current per Channel	35 mA
SR - Slew Rate	57 V/us	Vos - Input Offset Voltage	1.3 mV
Supply Voltage - Min	2.7 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 125 C	Ib - Input Bias Current	1.9 uA
Operating Supply Current	1.25 mA	Shutdown	Shutdown
CMRR - Common Mode Rejection Ratio	108 dB	en - Input Voltage Noise Density	10 nV/sqrt Hz
Series	LMH6618	Features	Shutdown
Height	0.87 mm	In - Input Noise Current Density	1 pA/sqrt Hz
Input Type	Rail-to-Rail	Length	2.97 mm
Operating Supply Voltage	3 V, 5 V, 9 V	Output Type	Rail-to-Rail
Product	Operational Amplifiers	Product Type	Op Amps - Operational Amplifiers
PSRR - Power Supply Rejection Ratio	64 dB	Factory Pack Quantity	1000
Subcategory	Amplifier ICs	Supply Type	Single
Technology	BiCOM	Voltage Gain dB	100 dB
Width	1.65 mm	Unit Weight	0.000420 oz