This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM94023BITME/NOPB +BOM

Temperature Sensor Analog, Local -50°C ~ 150°C 5.5mV/°C, 8.2mV/°C 4-DSBGA

Manufacturer:

TI
Mfr.Part #:

LM94023BITME/NOPB
Datasheet:

LM94023BITME/NOPB Datasheet (PDF)
Local sensor accuracy (max):

1.5
Operating temperature range (°C):

-50 to 150
Supply voltage (min) (V):

1.5
Supply voltage (max) (V):

5.5
EDA/CAD Models:

Request Free CAD Models for LM94023BITME/NOPB

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM94023BITME/NOPB General Description

The LM94023 is a precision analog output CMOS integrated-circuit temperature sensor that operates at a supply voltage as low as 1.5 Volts. Available in the very small four-bump DSBGA 0.8mm x 0.8mm) the LM94023 occupies very little board area. A class-AB output structure gives the LM94023 strong output source and sink current capability for driving heavy loads, making it well suited to source the input of a sample-and-hold analog-to-digital converter with its transient load requirements, This generally means the LM94023 can be used without external components, like resistors and buffers, on the output. While operating over the wide temperature range of −50°C to +150°C, the LM94023 delivers an output voltage that is inversely porportional to measured temperature. The LM94023's low supply current makes it ideal for battery-powered systems as well as general temperature sensing applications.

A Gain Select (GS) pin sets the gain of the temperature-to-voltage output transfer function. Either of two slopes are selectable: −5.5 mV/°C (GS=0) or −8.2 mV/°C (GS=1). In the lowest gain configuration, the LM94023 can operate with a 1.5V supply while measuring temperature over the full −50°C to +150°C operating range. Tying GS high causes the transfer function to have the largest gain for maximum temperature sensitivity. The gain-select inputs can be tied directly to V_DD or Ground without any pull-up or pull-down resistors, reducing component count and board area. These inputs can also be driven by logic signals allowing the system to optimize the gain during operation or system diagnostics.

Key Features

Low 1.5V Operation
Push-pull Output with 50µA Source Current Capability
Two Selectable Gains
Very Accurate Over Wide Temperature Range of −50°C to +150°C
Low Quiescent Current
Output is Short-circuit Protected
Extremely Small DSBGA Package
Footprint Compatible with the Industry-standard LM20 Temperature Sensor

Key Specifications

Supply Voltage 1.5V to 5.5V
Supply Current 5.4 µA (typ)
Output Drive ±50 µA
Temperature Accuracy
- 20°C to 40°C ±1.5°C
- –50°C to 70°C ±1.8°C
- –50°C to 90°C ±2.1°C
- –50°C to 150°C ±2.7°C
Operating Temperature −50°C to 150°C

Specifications

Local sensor accuracy (max)	1.5	Operating temperature range (°C)	-50 to 150
Supply voltage (min) (V)	1.5	Supply voltage (max) (V)	5.5
Supply current (max) (µA)	8.1	Interface type	Analog output
Sensor gain (mV/°C)	-0.0082, -0.0055	Rating	Catalog
Features	Selectable gain setting