This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

LM258WYDT

General Purpose Amplifier 2 Circuit 8-SOIC

Manufacturer:

STMicroelectronics, Inc
Mfr.Part #:

LM258WYDT
Datasheet:

LM258WYDT Datasheet (PDF)
Series:

Automotive, AEC-Q100
Amplifier Type:

General Purpose
Number of Circuits:

2
Slew Rate:

0.6V/µs
EDA/CAD Models:

Request Free CAD Models for LM258WYDT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

LM258WYDT General Description

The LM158W, LM258W, and LM358W circuits consist of two independent, high-gain, operational amplifiers (op-amps), which employ an internal frequency compensation and are specifically designed to operate from a single power supply over a wide range of voltages. The low-power supply drain is independent of the power supply voltage magnitude. Application areas include transducer amplifiers, DC gain blocks, and all the conventional op-amp circuits, which can now be more easily implemented in single power supply systems. For example, these circuits can be directly supplied with the standard +5 V, which is used in logic systems and easily provide the required interface electronics with no additional power supply. In linear mode, the input common mode voltage range includes ground. The output voltage can also swing to ground, even though operated from a single power supply voltage.

Key Features

ESD internal protection: 2 kV
Internal frequency compensation implemented
Large DC voltage gain: 100 dB
Wide bandwidth (unity gain): 1.1 MHz (temperature compensated)
Very low supply current per operator -essentially independent of supply voltage
Low input bias current: 20 nA (temperature compensated)
Low input offset voltage: 2 mV
Low input offset current: 2 nA
Input common mode voltage range includes ground
Differential input voltage range equal to the power supply voltage
Large output voltage swing 0 V to (VCC+) - 1.5 V

Specifications

Category	Integrated Circuits (ICs)LinearAmplifiersInstrumentation, OP Amps, Buffer Amps	Series	Automotive, AEC-Q100
Amplifier Type	General Purpose	Number of Circuits	2
Output Type	-	Slew Rate	0.6V/µs
Gain Bandwidth Product	1.1 MHz	Current - Input Bias	20 nA
Voltage - Input Offset	2 mV	Current - Supply	700µA
Current - Output / Channel	60 mA	Voltage - Supply Span (Min)	3 V
Voltage - Supply Span (Max)	30 V	Operating Temperature	-40°C ~ 105°C
Mounting Type	Surface Mount	Base Product Number	LM258
Product Category	Operational Amplifiers - Op Amps	Mounting Style	SMD/SMT
Number of Channels	2 Channel	Supply Voltage - Max	30 V
GBP - Gain Bandwidth Product	1.1 MHz	Output Current per Channel	40 mA
SR - Slew Rate	600 mV/us	Vos - Input Offset Voltage	5 mV
Supply Voltage - Min	3 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 105 C	Ib - Input Bias Current	150 nA
Operating Supply Current	700 uA	Shutdown	No Shutdown
CMRR - Common Mode Rejection Ratio	85 dB	en - Input Voltage Noise Density	55 nV/sqrt Hz
Qualification	AEC-Q100	Height	1.65 mm
Length	5 mm	Operating Supply Voltage	5 V, 9 V, 12 V, 15 V
Product Type	Op Amps - Operational Amplifiers	Factory Pack Quantity	2500
Subcategory	Amplifier ICs	Supply Type	Single
Technology	Bipolar	Voltage Gain dB	100 dB
Width	4 mm	Unit Weight	0.017870 oz