Payment Method
HIP9011AB +BOM
Sensor Interface
SOP20-
Manufacturer:
-
Mfr.Part #:
HIP9011AB
-
Datasheet:
-
Type:
Knock Sensor Interface
-
Supply Voltage - Max:
5.25 V
-
Supply Voltage - Min:
4.75 V
-
Operating Supply Current:
5 mA
-
EDA/CAD Models:
Availability: 4448 PCS
Please fill in the short form below and we will provide you the quotation immediately.
HIP9011AB General Description
The HIP9011 is used to provide a method of detecting premature detonation often referred to as "Knock or Ping" in internal combustion engines. The IC is shown in the Simplified Block Diagram. The chip can select between one of two sensors, if needed for accurate monitoring or for "V" type engines. Internal control via the SPI bus is fast enough to switch sensors between each firing cycle. A programmable bandpass filter processes the signal from either of the sensor inputs. The bandpass filter can be selected to optimize the extraction the engine knock or ping signals from the engine background noise. Further single processing is obtained by full wave rectification of the filtered signal and applying it to an integrator whose output voltage level is proportional to the knock signal amplitude. The chip is under microprocessor control via a SPI interface bus.
Key Features
- Two Sensor Inputs
- Microprocessor Programmable
- Accurate and Stable Filter Elements
- Digitally Programmable Gain
- Digitally Programmable Time Constants
- Digitally Programmable Filter Characteristics
- On-Chip Crystal Oscillator
- Programmable Frequency Divider
- External Clock Frequencies up to 24MHz
- 4, 5, 6, 8, 10, 12, 16, 20, and 24MHz
- Operating Temperature Range -40°C to 125°C
- Pb-Free Plus Anneal Available (RoHS Compliant) Applications
- Engine Knock Detector Processor
- Analog Signal Processing Where Controllable Filter Characteristics are Required
Application
- Engine Knock Detector Processor
- Analog Signal Processing Where Controllable Filter Characteristics are Required
Specifications
Product Category: | Sensor Interface | Type: | Knock Sensor Interface |
Supply Voltage - Max: | 5.25 V | Supply Voltage - Min: | 4.75 V |
Operating Supply Current: | 5 mA | Minimum Operating Temperature: | - 40 C |
Maximum Operating Temperature: | + 125 C | Mounting Style: | SMD/SMT |
Features: | Two Sensor Inputs, Programmable | Height: | 2.35 mm |
Input Type: | Logic | Length: | 13 mm |
Operating Supply Voltage: | 5 V | Output Type: | Logic |
Product Type: | Sensor Interface | Subcategory: | Interface ICs |
Width: | 7.6 mm | Unit Weight: | 0.028254 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
HIP9011AB Datasheet PDF
HIP9011AB PDF Preview
In Stock: 4,448
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $12.841 | $12.84 |
200+ | $5.124 | $1,024.80 |
500+ | $4.953 | $2,476.50 |
1000+ | $4.868 | $4,868.00 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for HIP9011AB, guaranteed quotes back within 12hr.
These are uv leds. Different from those presented in the photo to the product. Purple leds should have a fill not transparent, but with a slight shade of pink/purple.