Payment Method
FT232RQ-Reel +BOM
USB to UART Bridge Manually 3.15Mbps 32-Pin QFN T/R
QFN-EP-32-
Manufacturer:
-
Mfr.Part #:
FT232RQ-Reel
-
Datasheet:
-
Series:
USBmadeEZ-UART
-
Programmabe:
Verified
-
Protocol:
USB
-
Function:
Bridge, USB to UART
-
EDA/CAD Models:
Availability: 6083 PCS
Please fill in the short form below and we will provide you the quotation immediately.
FT232RQ-Reel General Description
The FT232R is added to FTDI’s range of USB UART interface Integrated Circuit Devices. The FT232R is a USB to serial UART interface with optional clock generator output, and the new FTDIChip-ID™ security dongle feature. In addition, asynchronous and synchronous bit bang interface modes are available. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device.
The FT232R adds two new functions compared with its predecessors, effectively making it a “3-in-1” chip for some application areas. The internally generated clock (6MHz, 12MHz, 24MHz, and 48MHz) can be brought out of the device and used to drive a microcontroller or external logic. A unique number (the FTDIChip-ID™) is burnt into the device during manufacture and is readable over USB, thus forming the basis of a security dongle which can be used to protect customer application software from being copied.
The FT232R is available in Pb-free (RoHS compliant) compact 28-Lead SSOP and QFN-32 packages.
FT232RQ-Reel Specifications
- Type: Bridge, USB to UART
- Mounting Style: SMD/SMT
- Package / Case: QFN-EP-32
- Standard: USB 2.0
- Speed: High Speed (HS), Full Speed (FS)
- Data Rate: 12 Mb/s
- Supply Voltage - Min: 3.3 V
- Supply Voltage - Max: 5.25 V
- Operating Supply Current: 25 mA
- Minimum Operating Temperature: -40°C
- Maximum Operating Temperature: +85°C
- Packaging: Reel, Cut Tape, MouseReel
- Brand: FTDI
- Interface Type: UART
- Moisture Sensitive: Yes
- Operating Supply Voltage: 1.8 V to 5.25 V
- Product Type: USB Interface IC
- Subcategory: Interface ICs
- Tradename: R-CHIP
- Unit Weight: 0.005997 oz
Key Features
- Single chip USB to asynchronous serial data transfer interface
- Entire USB protocol handled on the chip. No USB specific firmware programming required
- Fully integrated 1024 bit EEPROM storing device descriptors and CBUS I/O configuration
- Fully integrated USB termination resistors
- Fully integrated clock generation with no external crystal required
- Data transfer rates from 300 baud to 3 Mbaud (RS422, RS485, RS232 ) at TTL levels
- 128 byte receive buffer and 256 byte transmit buffer
- FTDI royalty-free Virtual Com Port & Direct drivers eliminate requirement for USB driver development
- Unique USB FTDI Chip-ID feature
- Configurable CBUS I/O pins
- Transmit and receive LED drive signals
- UART interface support for 7 or 8 data bits, 1 or 2 stop bits and odd/even/mark/space/no parity
- FIFO receive and transmit buffers for high data throughput
- Synchronous and asynchronous bit bang interface options with RD# and WR# strobes
- Device supplied pre-programmed with unique USB serial number
- Supports bus powered, self powered and high power bus powered USB configurations
- Integrated +3.3V level converter for USB I/O
- Integrated level converter on UART and CBUS for interfacing to between +1.8V and +5V logic
- True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input
- Configurable I/O pin output drive strength
FT232RQ-Reel Datasheet PDF
Download FT232RQ-Reel Datasheet PDF here>>
Application
- USB to RS232/RS422/RS485 Converters
- Upgrading Legacy Peripherals to USB
- Cellular and Cordless Phone USB data transfer cables and interfaces
- Interfacing MCU/PLD/FPGA based designs to USB
- USB Audio and Low Bandwidth Video data transfer
- PDA to USB data transfer
- USB Smart Card Readers
- USB Instrumentation
- USB Industrial Control
- USB MP3 Player Interface
- USB FLASH Card Reader and Writers
- Set Top Box PC - USB interface
- USB Digital Camera Interface
- USB Hardware Modems
- USB Wireless Modems
- USB Bar Code Readers
- USB Software and Hardware Encryption Dongles
FT232R Block Diagram
Specifications
Series | USBmadeEZ-UART | Programmabe | Verified |
Protocol | USB | Function | Bridge, USB to UART |
Interface | UART | Standards | USB 2.0 |
Voltage - Supply | 3.3V ~ 5.25V | Current - Supply | 15mA |
Operating Temperature | -40°C ~ 85°C | Base Product Number | FT232RQ |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 6,083
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for FT232RQ-Reel, guaranteed quotes back within 12hr.
Top Sellers
-
FT232RL
Ftdi Chip
FT232RL is a versatile USB to serial TTL level UART converter, boasting a Universal Asynchronous Receiver & Transmitter with a data rate of 3MBd
-
FT234XD-R
Ftdi
Compact DFN-12 package
-
FT230XQ-R
Ftdi
Not offered in your region
-
FT232BM
FTDI Chip
USB Interface IC Obsolete FT232BL
-
FT231XS-R
Ftdi
USB to Full Handshake UART Interface SSOP20 Reel
Frankie & Jennifer are very professional. Prompt delivery and their customer service is excellent. Thanks