Payment Method
FT230XQ-R
Not offered in your region
-
Manufacturer:
-
Mfr.Part #:
FT230XQ-R
-
Datasheet:
-
Series:
USBmadeEZ-UART, FT-X, X-Chip
-
Programmable:
Not Verified
-
Protocol:
USB
-
Function:
Bridge, USB to UART
-
EDA/CAD Models:
Availability: 7289 PCS
Please fill in the short form below and we will provide you the quotation immediately.
FT230XQ-R General Description
The FT230XQ-R is part of FTDI's FT-X series of USB bridge ICs. These devices are designed to offer a seamless interface between UART-based systems and USB connections. They are widely used in various embedded systems, development boards, and other applications that require USB connectivity for communication and programming.
Key Features
- Single Chip USB to Asynchronous Serial Data Transfer Interface
- Entire USB Protocol Handled on Chip, No USB Specific Firmware Programming Required
- Fully Integrated 2048-byte EEPROM for Storing Device Descriptors and CBUS I/O Configuration
- Fully Integrated Clock Generation with no external crystal required + Optional clock o/p selection
- Data Transfer Rates from 300 Baud to 3Mbaud
- 512-byte Transmit and Receive Buffer utilising buffer smoothing technology for high data throughput
- Royalty-free VCP and Direct (D2XX) drivers eliminate requirement for USB driver development
- Configurable CBUS I/O Pins
- Transmit and Receive LED Drive Signals
- UART Interface Support for 7 or 8 Data Bits, 1 or 2 Stop Bits and Odd/Even/Mark/Space/No Parity
- Synchronous and Asynchronous Bit Bang Interface Options with RD# and WR# Strobes
- Battery Charger Detection, presence of a charger on USB port to enable faster charging of Batteries
- Device Supplied Pre-programmed with Unique USB Serial Number
- Supports Bus Powered, Self-powered and High-power Bus Powered USB Configurations
- Integrated +3.3V Level Converter for USB I/O
- True 3.3V CMOS drive output and TTL input (Operates down to 1V8 with external pull up)
- Configurable I/O Pin Output Drive Strength
- Integrated Power-on-reset Circuit
- UART Signal Inversion Option
- Internal 3.3V/1.8V LDO Regulators
Application
- Microcontroller Programming: They are commonly used to program and debug microcontrollers with UART interfaces via USB connections.
- Serial Communication: These ICs can be used to interface with serial devices like GPS receivers, sensors, industrial controllers, and more.
- Embedded Systems: In embedded systems, they facilitate USB connectivity for communication and configuration.
- Development Boards: Many development boards and evaluation kits integrate FTDI USB-to-UART bridges for easy communication with a host computer during development and debugging.
- Custom USB Devices: Designers use these ICs to create custom USB devices or converters for specific applications.
Specifications
Category | Integrated Circuits (ICs)InterfaceControllers | Series | USBmadeEZ-UART, FT-X, X-Chip |
Programmable | Not Verified | Protocol | USB |
Function | Bridge, USB to UART | Interface | UART |
Standards | USB 2.0 | Voltage - Supply | 3.3V ~ 5V |
Current - Supply | 8mA | Operating Temperature | -40°C ~ 85°C |
Base Product Number | FT230XQ |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 7289 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for FT230XQ-R, guaranteed quotes back within 12hr.
Top Sellers
-
FT234XD-R
Ftdi
Compact DFN-12 package
-
FT232BM
FTDI Chip
USB Interface IC Obsolete FT232BL
-
FT232RQ-Reel
Ftdi
USB to UART Bridge Manually 3.15Mbps 32-Pin QFN T/R
-
FT231XS-R
Ftdi
USB to Full Handshake UART Interface SSOP20 Reel
-
FT234XD-T
FTDI Chip
USB Bridge, USB to UART USB 2.0 UART Interface 12-DFN (3x3)
Does not overwrite through intercom prebor