This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

FPF2702MPX

Current Limit SW 1-IN 1-OUT 2.8V to 36V 2A 8-Pin MLP EP T/R

Manufacturer:

onsemi
Mfr.Part #:

FPF2702MPX
Datasheet:

FPF2702MPX Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Obsolete
Reach Compliance Code:

compliant
ECCN Code:

EAR99
EDA/CAD Models:

Request Free CAD Models for FPF2702MPX

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

FPF2702MPX General Description

The AccuPower™ FPF270X series is a family of current-limit load switches that provide full protection to systems and loads from excess current conditions. Minimum current limit is adjustable from 0.4 A to 2.0 A. The FPF270X contains a slew-rate-controlled N-channel MOSFET and slew-rated turn-on to prevent power bus disturbances from being caused by "hot plugging" loads or momentary excess load demands. The input voltage range is 2.8 V to 36 V. Loads can be activated or deactivated with a low-voltage logic-compatible ON pin. Fault conditions can be monitored using the error flag pin and/or the power-good pin. Each member of the FPF270X family serves a category of load-fault response. All devices clamp the load current so that it cannot exceed an externally programmed current level. An over temperature feature provides further device protection in case of excessive levels of power dissipation. FPF2702 is intended to be used with external fault management. Like the FPF2700 and FPF2701, it sets the fault signal pin LOW when it activates current clamping. This device is intended for applications where external fault management coordinates the overload response with the FPF2702. The FPF270X is available in a space-saving Pb and Halogen free, 8-lead MLP 3x3mm and SO8 packages.

Specifications

Source Content uid	FPF2702MPX	Pbfree Code	Yes
Part Life Cycle Code	Obsolete	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.39.00.01
Factory Lead Time	51 Weeks	Built-in Protections	OVER CURRENT; THERMAL; UNDER VOLTAGE
Driver Number of Bits	1	Interface IC Type	BUFFER OR INVERTER BASED PERIPHERAL DRIVER
JESD-30 Code	S-PDSO-N8	JESD-609 Code	e4
Length	3 mm	Moisture Sensitivity Level	1
Number of Functions	1	Number of Terminals	8
Operating Temperature-Max	85 °C	Operating Temperature-Min	-40 °C
Output Current Flow Direction	SOURCE	Output Peak Current Limit-Nom	0.4 A
Peak Reflow Temperature (Cel)	260	Qualification Status	Not Qualified
Seated Height-Max	0.8 mm	Supply Voltage-Max	36 V
Supply Voltage-Min	2.8 V	Supply Voltage-Nom	12 V
Surface Mount	YES	Temperature Grade	INDUSTRIAL
Terminal Finish	NICKEL PALLADIUM GOLD SILVER	Terminal Form	NO LEAD
Terminal Pitch	0.65 mm	Terminal Position	DUAL
Time@Peak Reflow Temperature-Max (s)	30	Width	3 mm