This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

EPCQL1024F24IN

Configuration Device 24-Pin FBGA Tray

Manufacturer:

Intel Corp
Mfr.Part #:

EPCQL1024F24IN
Datasheet:

EPCQL1024F24IN Datasheet (PDF)
Series:

EPCQ-L
Programmable:

Not Verified
Programmable Type:

In System Programmable
Memory Size:

1Gb
EDA/CAD Models:

Request Free CAD Models for EPCQL1024F24IN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

EPCQL1024F24IN General Description

Intel Serial or quad-serial FPGA configuration in devices that support active serial (AS) x1 or AS x41 configuration schemes. Reprogrammable memory more than 100,000 program-erase cycles. Write protection support for memory sectors using status register bits. Fast read, extended dual input fast read, and extended quad input fast read of the entire memory using a single operation code. Reprogrammable with an external microprocessor using the SRunner software driver. In-system programming (ISP) support with the SRunner software driver. ISP support with Intel® FPGA Download Cable II, Intel® FPGA Download Cable, or Intel® FPGA Ethernet Cable. By default, the memory array is erased and the bits are set to 1.

The EPCQ4A, EPCQ16A, and EPCQ32A devices are available in 8-pin SOIC packages.The EPCQ64A and EPCQ128A devices are available in 16-pin SOIC packages.

EPCQ-A devices support active and standby power modes. When the nCS signal is low,the device is enabled and is in active power mode. The FPGA is configured while theEPCQ-A device is in active power mode. When the nCS signal is high, the device isdisabled but remains in active power mode until all internal cycles are completed, suchas write or erase operations. The EPCQ-A device then goes into standby power mode.The ICC1 and ICC0 parameters list the VCC supply current when the device is in activeand standby power modes.

Key Features

The features of EPCQL1024F24IN include compatibility with Intel Stratix 10
Intel Arria 10
and Intel Cyclone 10 GX devices
native support for active serial

Application

The EPCQL1024F24IN device is a non-volatile memory device that can be used in various applications such as industrial automation
automotive electronics
communication systems
and consumer electronics
It offers reprogrammable memory with high endurance
fast read capabilities
and write protection support for memory sectors

Specifications

Category	Integrated Circuits (ICs)MemoryConfiguration Proms for FPGAs	Series	EPCQ-L
Programmable	Not Verified	Programmable Type	In System Programmable
Memory Size	1Gb	Voltage - Supply	1.7V ~ 2V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Surface Mount