Payment Method
TPS60120PWP
Regulated 3.3V high efficiency charge pump DC/DC converter with low-battery detector
-
Manufacturer:
-
Mfr.Part #:
TPS60120PWP
-
Datasheet:
-
Function:
Step-Up
-
Output Configuration:
Positive
-
Topology:
Charge Pump
-
Output Type:
Fixed
-
EDA/CAD Models:
Availability: 3395 PCS
Please fill in the short form below and we will provide you the quotation immediately.
TPS60120PWP General Description
The TPS6012x step-up, regulated charge pumps generate a 3.3-V or 3-V ±4% output voltage from a 1.8-V to 3.6-V input voltage (two alkaline, NiCd, or NiMH batteries). They can deliver an output current of at least 200 mA (100 mA for the TPS60122 and TPS60123), all from a 2-V input. Four external capacitors are needed to build a complete high efficiency dc/dc charge pump converter. To achieve the high efficiency over a wide input voltage range, the charge pump automatically selects between a 1.5x or doubler conversion mode. From a 2-V input, all ICs can start with full load current.
The devices feature the power-saving pulse-skip mode to extend battery life at light loads. TPS60120, TPS60122, and TPS60124 include a low battery comparator. TPS60121, TPS60123, and TPS60125 feature a power-good output. The logic shutdown function reduces the supply current to a maximum of 1uA and disconnects the load from the input. Special current-control circuitry prevents excessive current from being drawn from the battery during start-up. This dc/dc converter requires no inductors, therefore EMI is of low concern. It is available in the small, thermally enhanced 20-pin PowerPADTM package (PWP).
Key Features
- High Average Efficiency Over Input Voltage Range Because of Special Switching Topology
- Minimum 200-mA Output Current From an Input Voltage Range of 1.8-V to 3.6-V
- Regulated 3.3-V or 3-V ±4% Output Voltage
- No Inductors Required, Low EMI
- Only Four External Components Required
- 55-uA Quiescent Supply Current
- 0.05-uA Shutdown Current
- Load Disconnected in Shutdown
- Integrated Low Battery and Power Good Detectors
- Evaluation Module Available (TPS60120EVM-142)
- Applications
- Applications Powered by Two Battery Cells
- Portable Instruments
- Battery-Powered Microprocessor Systems
- Miniature Equipment
- Backup-Battery Boost Converters
- PDAs, Organizers, Laptops
- MP-3 Portable Audio Players
- Handheld Instrumentation
- Medical Instruments (e.g., Glucose Meters)
- Cordless Phones
PowerPAD is a trademark of Texas Instruments Incorporated.
Specifications
Category | Integrated Circuits (ICs)Power Management (PMIC)Voltage Regulators - DC DC Switching Regulators | Series | - |
Function | Step-Up | Output Configuration | Positive |
Topology | Charge Pump | Output Type | Fixed |
Number of Outputs | 1 | Voltage - Input (Min) | 1.8V |
Voltage - Input (Max) | 3.6V | Voltage - Output (Min/Fixed) | 3.3V |
Voltage - Output (Max) | - | Current - Output | 200mA |
Frequency - Switching | 320kHz | Synchronous Rectifier | No |
Operating Temperature | -40°C ~ 85°C (TA) | Mounting Type | Surface Mount |
Base Product Number | TPS60120 | Vin (min) (V) | 1.8 |
Vin (max) (V) | 3.6 | Vout (min) (V) | 3.3 |
Vout (max) (V) | 3.3 | Iout (max) (A) | 0.2 |
Regulated outputs (#) | 1 | Switching frequency (min) (kHz) | 210 |
Switching frequency (max) (kHz) | 450 | Iq (typ) (mA) | 0.055 |
Features | Enable | Operating temperature range (°C) | -40 to 85 |
Rating | Catalog | Type | Charge pump |
feature-function | Step Up | feature-process-technology | |
feature-output-type | Fixed | feature-output-voltage-v | 3.3 |
feature-minimum-operating-supply-voltage-v | 1.8 | feature-maximum-operating-supply-voltage-v | 3.6 |
feature-maximum-supply-current-ma | feature-maximum-power-dissipation-mw | 700 | |
feature-output-current-ma | 200(Max) | feature-switching-frequency-khz | 450 |
feature-efficiency- | feature-packaging | Tube | |
feature-rad-hard | feature-pin-count | 20 | |
feature-cecc-qualified | No | feature-esd-protection | |
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-eccn-code | EAR99 | |
feature-svhc | Yes | feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 3395 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for TPS60120PWP, guaranteed quotes back within 12hr.