This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

DSPIC33EV32GM106-I/PT

dsPIC dsPIC™ 33EV, Functional Safety (FuSa) Microcontroller IC 16-Bit 70 MIPs 32KB (11K x 24) FLASH 64-TQFP (10x10)

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

DSPIC33EV32GM106-I/PT
Datasheet:

DSPIC33EV32GM106-I/PT Datasheet (PDF)
Series:

dsPIC 33EV
Packaging:

Tray Alternate Packaging
Operating-Temperature:

-40°C ~ 85°C (TA)
Number-of-I-O:

53
EDA/CAD Models:

Request Free CAD Models for DSPIC33EV32GM106-I/PT

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

DSPIC33EV32GM106-I/PT General Description

dsPIC dsPIC™ 33EV, Functional Safety (FuSa) Microcontroller IC 16-Bit 70 MIPs 32KB (11K x 24) FLASH 64-TQFP (10x10)

Key Features

Operating Conditions
4.5V to 5.5V, -40ºC to +85ºC, DC to 70 MIPS
4.5V to 5.5V, -40ºC to +125ºC, DC to 60 MIPS
4.5V to 5.5V, -40ºC to +150ºC, DC to 40 MIPS
dsPIC33E Core
Code-Efficient (C and Assembly) Architecture
Two 40-Bit Wide Accumulators
Single-Cycle (MAC/MPY) with Dual Data Fetch
Single-Cycle, Mixed-Sign MUL plus Hardware Divide
32-Bit Multiply Support
Provides a boot Flash segment in addition to the existing general Flash segment
Error Code Correction (ECC) for Flash
Added Two Alternate Register Sets for Fast Context Switching
Up to Six Pulse-Width Modulation (PWM) Outputs (three generators)
High-Speed PWM
Primary Master Time Base Inputs allow Time Base Synchronization from Internal/External Sources
Dead Time for Rising and Falling Edges
8.3 ns PWM Resolution at 60 MIPS,
16.6 ns Center-Aligned mode at 60 MIPS
PWM support DC/DC, AC/DC, inverters, Power Factor Correction (PFC) and lighting
PWM support Brushless Direct Current (BLDC), Permanent Magnet Synchronous Motor (PMSM), AC Induction Motor (ACIM), Switched Reluctance Motor (SRM)
Programmable Fault inputs
Flexible trigger configurations for Analog-to-Digital conversion
Independent Time Base
Supports PWM lock, PWM output chopping and dynamic phase shifting
Integrated Analog Features
ADC configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
Up to 36 analog inputs
Flexible and Independent ADC Trigger Sources
Up to Four Op Amp/Comparators with Direct Connection to the ADC module:
Additional dedicated comparator and 7-bit Digital-to-Analog Converter (DAC)
Programmable references with 128 voltage points
Programmable blanking and filtering
Charge Time Measurement Unit
Supports mTouch™ capacitive touch sensing
Provides high-resolution time measurement (1 ns)
On-chip temperature measurement
Temperature sensor diode
Multiple sources of edge input triggers
Timers/Output Compare/Input Capture
Up to nine general purpose timers
Five 16-bit or up to two 32-bit timers/counters, Timer3 can provide ADC trigger
Oscillator Frequency Monitoring through CTMU
Four Output Capture modules configurable as timers/counters
Four Input Capture modules
Communication Interfaces
CAN module with 32 buffers, 16 filters and three masks
Support for LIN/J2602 bus support and IrDA®
High and low speed (SCI)
25 Mbps data rate without PPS used
One I2C™ module (up to 1 Mbaud) with SMBus Support
Two SENT J2716 (Single Edge Nibble Transmission-Transmit/Receive) module for Automotive Applications
Direct Memory Access (DMA)
4-Channel DMA with User-Selectable Priority Arbitration
Universal Asynchronous Receiver/Transmitter (UART), Serial Peripheral Interface (SPI), ADC, Input Capture, Output Compare
Qualification and Class B Support
AEC-Q100 Grade 1 (-40ºC to +125ºC)
AEC-Q100 Grade 0 (-40ºC to +150ºC)
Class B Safety Library, IEC 60730
Functional Safety support (ISO26262)
ASIL-B focused applications
FMEDA and Safety manual
XC16 Functional Safety Compiler
Functional Safety hardware features
Flash with Error Correction Code (ECC)
CodeGuard™ Memory Protection
On-chip Regulator for CPU
Backup FRC and redundant clock sources
Fail Safe Clock Monitor
Windowed Watchdog Timer (WDT)
Windowed Deadman Timer (DMT)
Oscillator Frequency Monitoring through CTMU (OSCI, SYSCLK, FRC, BFRC, LPRC)
BOR and POR
Cyclical Redundancy Check (CRC)
Analog peripherals redundancies
Illegal Opcode Detection
PWM Lock and Dedicated PWM Fault Pin
Internal Loopback to test communication peripherals and IO ports
SFR and Configuration Locks
Math Error Trap
Address Trap
Redundant data storage for Flash-based Configuration bits and Peripheral Pin Select (PPS) Configuration bits

Microchip Technology, Inc Original Stock

Specifications

Product Category	Embedded - Microcontrollers	Series	dsPIC 33EV
Packaging	Tray Alternate Packaging	Operating-Temperature	-40°C ~ 85°C (TA)
Number-of-I-O	53	Speed	70 MIPs
EEPROM-Size	-	Core-Processor	dsPIC
RAM-Size	4K x 8	Program-Memory-Type	FLASH
Peripherals	Brown-out Detect/Reset, DMA, POR, PWM, WDT	Connectivity	CAN, I2C, IrDA, LIN, SPI, UART/USART
Voltage-Supply-Vcc-Vdd	4.5 V ~ 5.5 V	Core-Size	16-Bit
Program-Memory-Size	32KB (11K x 24)	Data-Converters	A/D 36x10/12b
Oscillator-Type	Internal	Tags	dsPIC33EV32GM106, dsPIC33EV32GM1, dsPIC33EV3, dsPIC33EV, dsPIC33E, dsPIC33, dsPIC3, dsPIC, dsPI, DSP
Product	DSCs	Tradename	dsPIC
Mounting Style	SMD/SMT	Core	dsPIC33E
Number of Cores	1 Core	Maximum Clock Frequency	70 MHz
L1 Cache Instruction Memory	-	L1 Cache Data Memory	-
Program Memory Size	32 kB	Data RAM Size	4 kB
Operating Supply Voltage	4.5 V to 5.5 V	Minimum Operating Temperature	- 40 C
Maximum Operating Temperature	+ 85 C	Qualification	AEC-Q100
Data Bus Width	16 bit	Instruction Type	Fixed/Floating Point
Interface Type	Serial	Moisture Sensitive	Yes
Number of I/Os	53 I/O	Number of Timers/Counters	7 Timer
Product Type	DSP - Digital Signal Processors & Controllers	Program Memory Type	Flash
Factory Pack Quantity	160	Subcategory	Embedded Processors & Controllers
Supply Voltage - Max	5.5 V	Supply Voltage - Min	4.5 V
Watchdog Timers	Watchdog Timer	Unit Weight	0.081906 oz