This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

DSPIC33EP32MC504-I/ML

MCU 16-bit dsPIC RISC 32KB Flash 3.3V 44-Pin QFN EP Tube

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

DSPIC33EP32MC504-I/ML
Datasheet:

DSPIC33EP32MC504-I/ML Datasheet (PDF)
Series:

dsPIC™ 33EP
Core Processor:

dsPIC
Core Size:

16-Bit
Speed:

70 MIPs
EDA/CAD Models:

Request Free CAD Models for DSPIC33EP32MC504-I/ML

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

DSPIC33EP32MC504-I/ML General Description

dsPIC dsPIC™ 33EP Microcontroller IC 16-Bit 70 MIPs 32KB (10.7K x 24) FLASH 44-QFN (8x8)

Key Features

Operating Conditions
3.0V to 3.6V, -40ºC to +85ºC, DC to 70 MIPS
3.0V to 3.6V, -40ºC to +150ºC, DC to 60 MIPS
dsPIC33E DSC Core
Modified Harvard Architecture
C Compiler Optimized Instruction Set
16-bit Wide Data Path
24-bit Wide Instructions
16x16 Integer Multiply Operations
32/16 and 16/16 Integer Divide Operations
Two 40-bit Accumulators with Rounding and Saturation Options
Single-Cycle Multiply and Accumulate
Single-Cycle shifts for up to 40-bit Data
16x16 Fractional Multiply/Divide Operations
High-Speed PWM
Up to three PWM pairs with independent timing
Dead time for rising and falling edges
7.14 ns PWM resolution
PWM support for Inverters, PFC, Lighting- BLDC, PMSM, ACIM, SRM
Programmable Fault inputs
Flexible trigger configurations for ADC conversions
Advanced Analog Features
ADC module: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H
Up to three Op amp/Comparators
Op Amp direct connection to the ADC module
Additional dedicated comparator
Programmable references with 32 voltage points for comparators
Charge Time Measurement Unit (CTMU)
Timers/Output Compare/Input Capture
12 general purpose timers
Five 16-bit and up to two 32-bit timers/counters
Four OC modules configurable as timers/counters
PTG module with two configurable timers/counters
32-bit Quadrature Encoder Interface (QEI) module configurable as a timer/counter
Four IC modules
Peripheral Trigger Generator (PTG) for scheduling complex sequences
Communication Interfaces
Two UART modules (15 Mbps)
Two 4-wire SPI modules (15 Mbps)
CAN™ module (1 Mbaud) CAN 2.0B support
Two I2C™ modules (up to 1 Mbaud) with SMBus support
PPS to allow function remap
Programmable Cyclic Redundancy Check (CRC)
Direct Memory Access (DMA)
4-channel DMA with user-selectable priority arbitration
UART, SPI, ADC, CAN, IC, OC, and Timers

Microchip Technology, Inc Original Stock

Specifications

Category	Integrated Circuits (ICs)EmbeddedMicrocontrollers	Series	dsPIC™ 33EP
Core Processor	dsPIC	Core Size	16-Bit
Speed	70 MIPs	Connectivity	CANbus, I²C, IrDA, LINbus, QEI, SPI, UART/USART
Peripherals	Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT	Number of I/O	35
Program Memory Size	32KB (10.7K x 24)	Program Memory Type	FLASH
EEPROM Size	-	RAM Size	2K x 16
Voltage - Supply (Vcc/Vdd)	3V ~ 3.6V	Data Converters	A/D 9x10b/12b
Oscillator Type	Internal	Operating Temperature	-40°C ~ 85°C (TA)
Mounting Type	Surface Mount	Base Product Number	DSPIC33EP32MC504
Programmabe	Not Verified