Payment Method
DAC124S085CIMM/NOPB +BOM
12-bit, micropower, quad-channel, digital-to-analog converter (DAC) with rail-to-rail output
VSSOP-10-
Manufacturer:
-
Mfr.Part #:
DAC124S085CIMM/NOPB
-
Datasheet:
-
Resolution (Bits):
12
-
Number Of DAC Channels:
4
-
Interface Type:
SPI
-
Output Type:
Buffered Voltage
-
EDA/CAD Models:
Availability: 7282 PCS
Please fill in the short form below and we will provide you the quotation immediately.
DAC124S085CIMM/NOPB General Description
The DAC124S085 device is a full-featured, general-purpose, quad, 12-bit, voltage-output, digital-to-analog converter (DAC) that can operate from a single 2.7-V to 5.5-V supply and consumes 1.1 mW at 3 V and 2.4 mW at 5 V. The DAC124S085 is packaged in 10-pin WSON and VSSOP packages.
The 10-pin SON package makes the DAC124S085 the smallest quad DAC in its class. The on-chip output amplifier allows rail-to-rail output swing and the three-wire serial interface operates at clock rates up to 40 MHz over the entire supply voltage range. Competitive devices are limited to 25-MHz clock rates at supply voltages in the 2.7-V to 3.6-V range. The serial interface is compatible with standard SPI, QSPI, MICROWIRE, and DSP interfaces.
The reference for the DAC124S085 serves all four channels and can vary in voltage between 1 V and VA, providing the widest possible output dynamic range. The DAC124S085 has a 16-bit input shift register that controls the outputs to be updated, the mode of operation, the power-down condition, and the binary input data. All four outputs can be updated simultaneously or individually depending on the setting of the two mode of operation bits.
A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt with three different termination options.
The low power consumption and small packages of the DAC124S085 make it an excellent choice for use in battery-operated equipment.
The DAC124S085 is one of a family of pin-compatible DACs, including the 8-bit DAC084S085 and the 10-bit DAC104S085. The DAC124S085 operates over the extended industrial temperature range of 40°C to 105°C.
Key Features
- Ensured Monotonicity
- Low Power Operation
- Rail-to-Rail Voltage Output
- Power-On Reset to 0 V
- Simultaneous Output Updating
- Wide Power Supply Range: 2.7 V to 5.5 V
- Industry’s Smallest Package
- Power-Down Modes
- Resolution: 12 Bits
- INL: ±8 LSB (Maximum)
- DNL: 0.7 to –0.5 LSB (Maximum)
- Setting Time: 8.5 µs (Maximum)
- Zero Code Error: 15 mV (Maximum)
- Full-Scale Error: –0.75% FS (Maximum)
- Supply Power:
- Normal: 1.1 mW at 3 V or 2.4 mW at 5 V
(Typical) - Power Down: 0.3 µW at 3 V or 0.8 µW at 5 V
(Typical)
- Normal: 1.1 mW at 3 V or 2.4 mW at 5 V
Specifications
Resolution (Bits) | 12 | Number of DAC channels | 4 |
Interface type | SPI | Output type | Buffered Voltage |
Settling time (µs) | 8.5 | Features | Cost Optimized, Low Power, Small Size |
Reference type | Ext | Architecture | String |
Rating | Catalog | Output range (max) (mA/V) | 5.5 |
Output range (min) (mA/V) | 0 | Sample/update rate (Msps) | 2.5 |
Power consumption (typ) (mW) | 1.1 | Operating temperature range (°C) | -40 to 105 |
feature-resolution | 12bit | feature-minimum-single-supply-voltage-v | 2.7 |
feature-maximum-single-supply-voltage-v | feature-maximum-dual-supply-voltage-v | ||
feature-power-supply-type | Single | feature-packaging | Tape and Reel |
feature-minimum-dual-supply-voltage-v | feature-rad-hard | ||
feature-pin-count | 10 | feature-cecc-qualified | No |
feature-esd-protection | Yes | feature-escc-qualified | |
feature-military | No | feature-aec-qualified | No |
feature-aec-qualified-number | feature-auto-motive | No | |
feature-p-pap | No | feature-eccn-code | EAR99 |
feature-svhc | No | feature-svhc-exceeds-threshold | No |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
In Stock: 7,282
Minimum Order: 1
Qty. | Unit Price | Ext. Price |
---|---|---|
1+ | $5.423 | $5.42 |
10+ | $4.749 | $47.49 |
30+ | $4.123 | $123.69 |
100+ | $3.779 | $377.90 |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for DAC124S085CIMM/NOPB, guaranteed quotes back within 12hr.
Top Sellers
-
ADS1115IDGST
Texas Instruments
1000+ $1.850
-
ADS1115IDGSR
Texas Instruments
1000+ $1.131
-
PCM2704
TI
98dB SNR Stereo USB2.0 FS DAC with line-out and S/PDIF output, Bus/Self-powered (Ext. ROM Interface)
-
ADS1258
TI
24-bit, 125kSPS, 16-ch delta-sigma ADC with fast channel scan and automatic sequencer
-
PCM56P
Texas Instruments
DAC, Audio 16 b PCM 16-PDIP
Delivery to st. petersburg 18 days, tracking was not tracked. In the package there were 49 leds, in appearance different from those in the seller's picture. The seller does not respond to requests.