This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

ATTINY4313-MU

8-bit Microcontrollers - MCU AVR 4KB FL 256B SRAM 256B 20MHz 1.8-5.5V

Manufacturer:

MICROCHIP
Mfr.Part #:

ATTINY4313-MU
Datasheet:

ATTINY4313-MU Datasheet (PDF)
Pbfree Code:

Yes
Part Life Cycle Code:

Active
Reach Compliance Code:

compliant
ECCN Code:

EAR99

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

ATTINY4313-MU General Description

AVR AVR® ATtiny Microcontroller IC 8-Bit 20MHz 4KB (2K x 16) FLASH 20-QFN-EP (4x4)

Key Features

High Performance, Low Power AVR® 8-Bit Microcontroller
Advanced RISC Architecture
– 120 Powerful Instructions – Most Single Clock Cycle Execution
– 32 x 8 General Purpose Working Registers
– Fully Static Operation
– Up to 20 MIPS Throughput at 20 MHz
Data and Non-volatile Program and Data Memories
– 2/4K Bytes of In-System Self Programmable Flash
Endurance 10,000 Write/Erase Cycles
– 128/256 Bytes In-System Programmable EEPROM
Endurance: 100,000 Write/Erase Cycles
– 128/256 Bytes Internal SRAM
– Programming Lock for Flash Program and EEPROM Data Security
Peripheral Features
– One 8-bit Timer/Counter with Separate Prescaler and Compare Mode
– One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Modes
– Four PWM Channels
– On-chip Analog Comparator
– Programmable Watchdog Timer with On-chip Oscillator
– USI – Universal Serial Interface
– Full Duplex USART
Special Microcontroller Features
– debugWIRE On-chip Debugging
– In-System Programmable via SPI Port
– External and Internal Interrupt Sources
– Low-power Idle, Power-down, and Standby Modes
– Enhanced Power-on Reset Circuit
– Programmable Brown-out Detection Circuit
– Internal Calibrated Oscillator
I/O and Packages
– 18 Programmable I/O Lines
– 20-pin PDIP, 20-pin SOIC, 20-pad MLF/VQFN
Operating Voltage
– 1.8 – 5.5V
Speed Grades
– 0 – 4 MHz @ 1.8 – 5.5V
– 0 – 10 MHz @ 2.7 – 5.5V
– 0 – 20 MHz @ 4.5 – 5.5V
Industrial Temperature Range: -40°C to +85°C
Low Power Consumption
– Active Mode
190 µA at 1.8V and 1MHz
– Idle Mode
24 µA at 1.8V and 1MHz
– Power-down Mode
0.1 µA at 1.8V and +25°C

Specifications

Source Content uid	ATTINY4313-MU	Pbfree Code	Yes
Part Life Cycle Code	Active	Reach Compliance Code	compliant
ECCN Code	EAR99	HTS Code	8542.31.00.01
Has ADC	NO	Address Bus Width
Bit Size	8	Boundary Scan	NO
CPU Family	AVR RISC	Clock Frequency-Max	8 MHz
DAC Channels	NO	DMA Channels	NO
External Data Bus Width		Format	FIXED POINT
Integrated Cache	NO	JESD-30 Code	S-PQCC-N20
JESD-609 Code	e3	Length	4 mm
Low Power Mode	YES	Moisture Sensitivity Level	3
Number of External Interrupts	1	Number of I/O Lines	18
Number of Serial I/Os	5	Number of Terminals	20
Number of Timers	2	On Chip Data RAM Width	8
On Chip Program ROM Width	16	Operating Temperature-Max	85 °C
Operating Temperature-Min	-40 °C	PWM Channels	YES
Peak Reflow Temperature (Cel)	260	Qualification Status	Not Qualified
RAM (bytes)	256	RAM (words)	256
ROM (words)	2048	ROM Programmability	FLASH
Seated Height-Max	0.8 mm	Speed	20 MHz
Supply Current-Max	7 mA	Supply Voltage-Max	5.5 V
Supply Voltage-Min	4.5 V	Supply Voltage-Nom	5 V
Surface Mount	YES	Technology	CMOS
Temperature Grade	INDUSTRIAL	Terminal Finish	MATTE TIN
Terminal Form	NO LEAD	Terminal Pitch	0.5 mm
Terminal Position	QUAD	Time@Peak Reflow Temperature-Max (s)	40
Width	4 mm	uPs/uCs/Peripheral ICs Type	MICROCONTROLLER, RISC