This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

AT91RM9200-QU-002

Microprocessors - MPU 16kB SRAM 180MHz - PWM

Manufacturer:

Microchip Technology, Inc
Mfr.Part #:

AT91RM9200-QU-002
Datasheet:

AT91RM9200-QU-002 Datasheet (PDF)
Part Family:

SAM9200
Core:

ARM920T
FPU:

No
MaxSpeed (MHz):

180
EDA/CAD Models:

Request Free CAD Models for AT91RM9200-QU-002

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AT91RM9200-QU-002 General Description

The ARM®-based SAM920T runsup to 180 MHz and embeds Full Speed USB host and device interfaces, a 10/100Ethernet MAC, as well as standard peripherals such as a Multimedia CardInterface (MCI), I2S, USARTs, master/slave SPIs, 16-bit Timers and a TWI(Two-Wire Interface). The external bus interface features controllers for SDRAMand static memories including NAND flash and CompactFlash. The RM9200 isavailable in 256-ball LFBGA and 208-pin QFP packages.

Key Features

ARM920T ARM Thumb Processor running up to 180 MHz
16-Kbyte Data Cache, 16-Kbyte Instruction Cache
Memory Management Unit
Embedded Trace Module (256 LFBGA Package only)
16 Kbytes of SRAM, single-cycle access
128 Kbytes of ROM embedding standard bootstrap
32-bit External Bus Interface (EBI) supporting SDRAM, Static Memory, Burst Flash, Glueless Connection to CompactFlash® and NAND Flash/SmartMedia®
Enhanced Clock Generator and Power Management Controller
Two On-chip Oscillators with Two PLLs
Very Slow Clock Operating Mode and Software Power Optimization Capabilities
Four Programmable External Clock Signals
System Timer Including Periodic Interrupt, Watchdog and Second Counter
Real-time Clock with Alarm Interrupt
Debug Unit, Two-wire UART and Support for Debug Communication Channel
Advanced Interrupt Controller with 8-level Priority, Individually Maskable Vectored Interrupt Sources, SpuriousInterrupt Protected
Seven External Interrupt Sources and One Fast Interrupt Source
Four 32-bit PIO Controllers with Up to 122 Programmable I/O Lines, Input Change Interrupt and Open-drain Capability on Each Line
20-channel Peripheral DMA Controller (PDC)
Media Independent Interface (MII) or Reduced Media Independent Interface (RMII)
Integrated 28-byte FIFOs and Dedicated DMA Channels for Receive and Transmit
Dual On-chip Transceivers (Single Port Only on 208-lead PQFP Package)
Integrated FIFOs and Dedicated DMA Channels
On-chip Transceiver, 2-Kbyte Configurable Integrated FIFOs
Automatic Protocol Control and Fast Automatic Data Transfers
MMC and SD Memory Card-compliant, Supports Up to Two SD Memory Cards
Independent Clock and Frame Sync Signals for Each Receiver and Transmitter
I2S Analog Interface Support, Time Division Multiplex Support
High-speed Continuous Data Stream Capabilities with 32-bit Data Transfer
Support for ISO7816 T0/T1 Smart Card
Hardware Handshaking
RS485 Support, IrDA® Up To 115 Kbps
Full Modem Control Lines on USART1
8- to 16-bit Programmable Data Length
4 External Peripheral Chip Selects
Three External Clock Inputs
Two Multi-purpose I/O Pins per Channel
Double PWM Generation, Capture/Waveform Mode, Up/Down Capability
Master Mode Support, All 2-wire Microchip EEPROMs Supported
IEEE® 1149.1 JTAG Boundary Scan on All Digital Pins
1.65V to 1.95V for VDDCORE, VDDOSC and VDDPLL
3.0V to 3.6V for VDDIOP (Peripheral I/Os) and for VDDIOM (Memory I/Os)
Low Power: On VDDCORE 24.4 mA in Normal Mode, 520 μA in Standby Mode
208-pin Green PQFP
256-ball RoHS-compliant LFBGA

Specifications

Part Family	SAM9200	Core	ARM920T
FPU	No	MaxSpeed (MHz)	180
Operation Voltage Min.(V)	1.65	Operation Voltage Max.(V)	1.95
Internal Oscillator	32kHz, 12MHz	L1 Cache Memory (Instructions) (KB)	16
L1 Cache Memory (Data) (KB)	16	DRAM Memory Interface	SDRAM
DRAM Memory Bus Size (Bits)	32	Internal DRAM Type	DDR2
Internal DRAM Amount (MB)	0	NAND Interface	Yes
ECC Bits on NAND interface	0	# of EBIs	1
SDIO/SD-CARD/eMMC	2	Direct Memory Access (DMA) Channels	24
Max I/O Pins	122	Pin Count	256
ISO 7816	4	Number of CAN Modules	0
Type of CAN module	None	LIN	No
Ethernet PTP & AVB Support	Ethernet PTP	LCD/Graphics Interface	No
Graphic LCD (GLCD) (bits)	No	Camera Interface	No
Secure Bootloader	No	Crypto Engine	No
Anti-Tampering Inputs	0	Secure Key Storage (Fuse bits)	0
ADC Channels	0	Max ADC Resolution (bits)	0
Max ADC Sampling Rate (ksps)	0	Temp Sensor	No
Hardware RTCC	Yes	Watch Dog Timers (WDT)	Yes
Quadrature Encoder Interface (QEI)	0	Temp. Range Min.	-40
Temp. Range Max.	85