Payment Method
ADS1147IPW
16-Bit 2kSPS 4-Ch ADC With PGA, Reference, and IDAC for Precision Sensor Measurement
-
Manufacturer:
-
Mfr.Part #:
ADS1147IPW
-
Datasheet:
-
Pbfree Code:
Yes
-
Part Life Cycle Code:
Active
-
Pin Count:
20
-
Reach Compliance Code:
compliant
-
EDA/CAD Models:
Availability: 5733 PCS
Please fill in the short form below and we will provide you the quotation immediately.
ADS1147IPW General Description
The ADS1146, ADS1147, and ADS1148 devices are precision, 16-bit analog-to-digital converters (ADCs) that include many integrated features to reduce system cost and component count for sensor measurement applications. The devices feature a low-noise, programmable gain amplifier (PGA), a precision delta-sigma (ΔΣ) ADC with a single-cycle settling digital filter, and an internal oscillator. The ADS1147 and ADS1148 devices also provide a built-in, low-drift voltage reference, and two matched programmable excitation current sources (IDACs).
An input multiplexer supports four differential inputs for the ADS1148, two for the ADS1147, and one for the ADS1146. In addition, the multiplexer integrates sensor burn-out detection, voltage bias for thermocouples, system monitoring, and general purpose digital I/Os (ADS1147 and ADS1148). The PGA provides selectable gains up to 128 V/V. These features provide a complete front-end solution for temperature sensor measurement applications including thermocouples, thermistors, and resistance temperature detectors (RTDs) and other small signal measurements including resistive bridge sensors. The digital filter settles in a single cycle to support fast channel cycling when using the input multiplexer and provides data rates up to 2 kSPS. For data rates of 20 SPS or less, both 50-Hz and 60-Hz interference are rejected by the filter.
Key Features
- Programmable Data Rates Up to 2 kSPS
- Single-Cycle Settling for All Data Rates
- Simultaneous 50-Hz and 60-Hz Rejection at
20 SPS - Analog Multiplexer With 8 (ADS1148) and
4 (ADS1147) Independently Selectable Inputs - Programmable Gain: 1 V/V to 128 V/V
- Dual-Matched Programmable Excitation Current Sources
- Low-Drift Internal 2.048-V Reference
- Sensor Burnout Detection
- 4 or 8 General-Purpose I/Os (ADS1147 and ADS1148)
- Internal Temperature Sensor
- Power Supply and VREF Monitoring (ADS1147 and ADS1148)
- Self and System Calibration
- SPI™-Compatible Serial Interface
- Analog Supply: Unipolar (2.7 V to 5.25 V) or Bipolar (±2.5 V)
- Digital Supply: 2.7 V to 5.25 V
Specifications
Source Content uid | ADS1147IPW | Pbfree Code | Yes |
Part Life Cycle Code | Active | Pin Count | 20 |
Reach Compliance Code | compliant | ECCN Code | EAR99 |
HTS Code | 8542.39.00.01 | Converter Type | ADC, DELTA-SIGMA |
JESD-30 Code | R-PDSO-G20 | Moisture Sensitivity Level | 2 |
Number of Analog In Channels | 4 | Number of Bits | 16 |
Number of Functions | 1 | Number of Terminals | 20 |
Output Bit Code | 2'S COMPLEMENT BINARY | Output Format | SERIAL |
Peak Reflow Temperature (Cel) | 260 | Surface Mount | YES |
Temperature Grade | INDUSTRIAL | Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Form | GULL WING | Terminal Position | DUAL |
Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED | Product Category | Analog to Digital Converters - ADC |
Series | ADS1147 | Mounting Style | SMD/SMT |
Resolution | 16 bit | Number of Channels | 2 Channel/3 Channel |
Interface Type | SPI | Sampling Rate | 2 kS/s |
Input Type | Differential/Single-Ended | Architecture | Sigma-Delta |
Analog Supply Voltage | 2.7 V to 5.25 V | Digital Supply Voltage | 2.7 V to 5.25 V |
Minimum Operating Temperature | - 40 C | Maximum Operating Temperature | + 105 C |
DNL - Differential Nonlinearity | +/- 1 LSB | Features | 50/60 Hz Rejection, Excitation Current Sources (iDACs), GPIO, Oscillator, PGA, Temp Sensor |
Height | 1 mm | INL - Integral Nonlinearity | +/- 1 LSB |
Length | 6.5 mm | Moisture Sensitive | Yes |
Number of Converters | 1 Converter | Operating Supply Voltage | 2.7 V to 5.25 V |
Pd - Power Dissipation | 2.3 mW | Power Consumption | 2.3 mW |
Product Type | ADCs - Analog to Digital Converters | Reference Type | External, Internal |
Factory Pack Quantity | 70 | Subcategory | Data Converter ICs |
Supply Voltage - Max | 5.25 V | Supply Voltage - Min | 2.7 V |
Width | 4.4 mm | Unit Weight | 0.002758 oz |
Service Policies and Others
After-Sales & Settlement Related
For alternative payment channels, please reach out to us at:
[email protected]Shipping Method
AVAQ determines and packages all devices based on electrostatic discharge (ESD) and moisture sensitivity level (MSL) protection requirements.
365-Day Product
Quality Guarantee
We promise to provide 365 days quality assurance service for all our products.
Availability: 5733 PCS
+BOMQty. | Unit Price | Ext. Price |
---|---|---|
1+ | - | - |
The prices below are for reference only.
All bill of materials (BOM) can be sent via email to [email protected], or fill below form to Quote for ADS1147IPW, guaranteed quotes back within 12hr.
Top Sellers
-
ADS1248IPWR
Texas Instruments
100+ $3.702
-
ADS1115IDGST
Texas Instruments
1000+ $1.850
-
ADS1115IDGSR
Texas Instruments
1000+ $1.131
-
ADS1248IPW
TI
24 Bit Analog to Digital Converter 4, 7 Input 1 Sigma-Delta 28-TSSOP
-
LM2917N
Texas Instruments
Frequency-to-voltage converter for ground or supply referred load up to 50-mA (with Zener regulat