This website uses cookies. By using this site, you consent to the use of cookies. For more information, please take a look at our Privacy Policy.

Images are for reference only,

See Technical Specifications

AD8011AN

Operational Amplifier, 1 Func, 6000uV Offset-Max, BIPolar, PDIP8

Manufacturer:

ADI
Mfr.Part #:

AD8011AN
Datasheet:

AD8011AN Datasheet (PDF)
Amplifier Type:

Current Feedback
Number of Circuits:

1
Slew Rate:

3500V/µs
-3db Bandwidth:

400 MHz
EDA/CAD Models:

Request Free CAD Models for AD8011AN

Email: [email protected]

Skype: live:.cid.ab6b29428937b76

Tel: +852 95804164

AD8011AN General Description

The AD8011 is a very low power, high speed amplifier designed to operate on +5 V or ±5 V supplies. With wide bandwidth, low distortion and low power, this device is ideal as a general purpose amplifier. It also can be used to replace high speed amplifiers consuming more power. The AD8011 is a current feed-back amplifier and features gain flatness of 0.1 dB to 25 MHz while offering differential gain and phase error of 0.02% and 0.06° on a single 5 V supply. This makes the AD8011 ideal for professional video electronics such as cameras, video switchers or any high speed portable equipment. Additionally, the AD8011's low distortion and fast settling make it ideal for buffering high speed 8-, 10-, 12-bit A-to-D converters. The AD8011 offers very low power of 1 mA max and can run on single 5 V to 12 V supplies. All this is offered in a small 8-pin PDIP or 8-pin SOIC package. These features fit well with portable and battery powered applications where size and power are critical. The AD8011 is available in the industrial temperature range of -40°C to +85°C. An evaluation board is available for this product and may be ordered using the following product number: AD8011-EB. Schematic and layout for this evaluation board is contained in the product datasheet.

Key Features

Easy to Use
Low Power
1 mA Power Supply Current (5 mW on +5 VS)
High Speed and Fast Settling on +5 V
300 MHz, –3 dB Bandwidth (G = +1)
180 MHz, –3 dB Bandwidth (G = +2)
2000 V/μs Slew Rate
29 ns Settling Time to 0.1%
Good Video Specifications (RL = 1 k, G = +2)
Gain Flatness 0.1 dB to 25 MHz
0.02% Differential Gain Error
0.06° Differential Phase Error
Low Distortion
–70 dBc Worst Harmonic @ 5 MHz
–62 dBc Worst Harmonic @ 20 MHz
Single Supply Operation
Fully Specified for +5 V Supply

Specifications

Amplifier Type	Current Feedback	Number of Circuits	1
Output Type	-	Slew Rate	3500V/µs
Gain Bandwidth Product	-	-3db Bandwidth	400 MHz
Current - Input Bias	5 µA	Voltage - Input Offset	2 mV
Current - Supply	1.3mA	Current - Output / Channel	30 mA
Voltage - Supply Span (Min)	3 V	Voltage - Supply Span (Max)	12 V
Operating Temperature	-40°C ~ 85°C	Mounting Type	Through Hole
Series	-	Base Product Number	AD8011